Go Back  Airline Pilot Central Forums > Airline Pilot Forums > Regional
Do I meet ATP requirements? >

Do I meet ATP requirements?

Search
Notices
Regional Regional Airlines

Do I meet ATP requirements?

Thread Tools
 
Search this Thread
 
Old 05-24-2006, 07:22 AM
  #1  
Gets Weekends Off
Thread Starter
 
duvie's Avatar
 
Joined APC: May 2006
Position: WB Bunkie
Posts: 1,246
Default Do I meet ATP requirements?

First off, I'm new to these forums so I wanted to say hi and thanks to everybody for all the knowledge that is being passed around.

I realize this may not be the place for this question, but I figured alot of guys get their ATPs while the are building time at regionals so you guys might know.

I got a job as a SIC in a King Air 100 flying scheduled 135 operations at 300TT. I recently upgraded (transitioned?) to a 1900 (same company). I've got around 850 TT, 480 ME, 450 Turbine, 425 SIC and only 275 PIC. I would like to stay with my current company, get my ATP and get some turbine PIC time. Here's the catch:

The FARs specify basic TT, night, instrument XC and PIC requirements which I will have. However there is a subsection that I don't fully understand:


61.159

(d) An applicant may be issued an airline transport pilot certificate with the endorsement, “Holder does not meet the pilot in command aeronautical experience requirements of ICAO,” as prescribed by Article 39 of the Convention on International Civil Aviation, if the applicant:

(1) Credits second-in-command or flight-engineer time under paragraph (c) of this section toward the 1,500 hours total flight time requirement of paragraph (a) of this section;

(2) Does not have at least 1,200 hours of flight time as a pilot, including no more than 50 percent of his or her second-in-command time and none of his or her flight-engineer time; and

(3) Otherwise meets the requirements of paragraph (a) of this section.

(e) When the applicant specified in paragraph (d) of this section presents satisfactory evidence of the accumulation of 1,200 hours of flight time as a pilot including no more than 50 percent of his or her second-in-command flight time and none of his or her flight-engineer time, the applicant is entitled to an airline transport pilot certificate without the endorsement prescribed in that paragraph.



I figure when I reach the magical 1500 TT I'll have around 1000 hours of SIC time. It seems a descent number of guys at regionals probably get a lot of their time as SICs. How do they get their ATPs? Will I be eligible? I've thought of going to a jet regional, but after talking to a lot of people and reading threads on this site it seems that PIC turboprop, although in a KIng Air, is still more valuable than SIC jet.

Any thoughts?

Last edited by duvie; 05-24-2006 at 07:24 AM.
duvie is offline  
Old 05-24-2006, 07:25 AM
  #2  
Banned
 
Joined APC: Nov 2005
Posts: 260
Default

sorry of topic, but how did you get the job with 300tt? Who is it with?
Thats pretty cool

edik
edik is offline  
Old 05-24-2006, 08:08 AM
  #3  
Gets Weekends Off
 
Browntail's Avatar
 
Joined APC: Oct 2005
Posts: 498
Default

Originally Posted by edik
sorry of topic, but how did you get the job with 300tt? Who is it with?
Thats pretty cool

edik


Actually that's pretty dangerous.
Browntail is offline  
Old 05-24-2006, 08:20 AM
  #4  
Gets Weekends Off
 
ERJ135's Avatar
 
Joined APC: Oct 2005
Position: CR7 Capt
Posts: 1,621
Default

Ok, This is how I interpet this. You will have a restiction on your ATP if;

more than 50 percent of the 1200hrs is SIC time. I understand you need 1500tt but at least 1200 needs to be flight time as a pilot. The rest could be FE time. So out of that 1200hrs no more than half of that or 600hrs may be SIC time or you will have a restriction on your ATP. Hope I got that right, if not anyone that knows better please clarify or correct away.
ERJ135 is offline  
Old 05-24-2006, 08:26 AM
  #5  
Gets Weekends Off
 
ERJ135's Avatar
 
Joined APC: Oct 2005
Position: CR7 Capt
Posts: 1,621
Default

Originally Posted by Browntail
Actually that's pretty dangerous.
Hey, Browntail

Wanna here a good one, flew with this guy who got his PVT in DEC and is now a CFI working at ATP towards the magical 500hrs for the RJ job. Did pretty much all weekend courses with the exception of the PVT. Did the 14day CFI course at ATP. Really is a kick in the A** because took me several years to attain my ratings and I am still instructing, now sure as hell he'll be flying an RJ before me. Though I am starting to lean more towards corporate now but, it is still crazy.
ERJ135 is offline  
Old 05-24-2006, 08:33 AM
  #6  
Banned
 
Joined APC: Nov 2005
Posts: 260
Default

Originally Posted by Browntail
Actually that's pretty dangerous.

Okay man, what ever you say. Its only beech 100, its not like he is jumping in a 757. All he did was probably do the radio work and navigation for the first 100 hrs or so. Also there are over sea airlines that hire into jet (SIC 747/777/343). If i had a chance to get that job, i would jump on it, i highly doubt it that the compnay would let him fly the plane to the mins when he was first hire.

edik
edik is offline  
Old 05-24-2006, 08:52 AM
  #7  
Gets Weekends Off
Thread Starter
 
duvie's Avatar
 
Joined APC: May 2006
Position: WB Bunkie
Posts: 1,246
Default

I worked as a line guy for a year. The company gave interview to the line guys who qualified. They didn't give jobs to all of us. There were a few hired that you could categorize as dangerous, however even after 700 hours with the company I think they're still more dangerous than some of the new guys coming in with low time. It really depends on the person, but I agree that 300TT is relatively low.

To be quite honest, we did start alternating legs from the beginning. Personally, I think the harder of the two roles early on was being the PNF. Acting as PF was easy. It was just like flying a Beech Duchess. Except the airspeed was faster and you had your PNF doing all the dirty work.

But this is all stuff for another thread I suppose
duvie is offline  
Old 05-24-2006, 09:05 AM
  #8  
Casper
Guest
 
Posts: n/a
Default "Bitter, party of 1"

Originally Posted by ERJ135
Hey, Browntail

Wanna here a good one, flew with this guy who got his PVT in DEC and is now a CFI working at ATP towards the magical 500hrs for the RJ job. Did pretty much all weekend courses with the exception of the PVT. Did the 14day CFI course at ATP. Really is a kick in the A** because took me several years to attain my ratings and I am still instructing, now sure as hell he'll be flying an RJ before me. Though I am starting to lean more towards corporate now but, it is still crazy.

So the kid got his ratings quicker than you. Big deal. I know guys that graduated college in 3 years and got a job one year earlier than me... big deal.

Are you saying the kid is a bad pilot? In flying, profiency is huge... of he went straight through, I would think he is pretty on the ball.

We all "do our time to get to a better place... some people just have the luxury/money to do it faster. What is wrong with that?
 
Old 05-24-2006, 09:26 AM
  #9  
Chief Jeppesen Updater
 
FlyerJosh's Avatar
 
Joined APC: Oct 2005
Position: Executive Transport Driver
Posts: 3,080
Default

Back to the original topic... the simple answer is that I dunno. I think the key words there are "may" and "ICAO".

I obtained my ATP under a part 142 program (CRJ type rating), but not with an airline (I was furloughed and used some grant money to get both ATP & Type). When I took the ride, I had an in-house examiner that signed me off. At the time I had 3800TT, 3157ME, 3070Turbine (CRJ), 3205 XC, and only 575 PIC (3044 SIC). I didn't have a limitation.

Even if you do have the limitation, it really doesn't affect anything you can or can't do, it just states that you didn't meet ICAO minimums when you applied for the certificate.
FlyerJosh is offline  
Old 05-27-2006, 07:48 AM
  #10  
robotsapproach
Guest
 
Posts: n/a
Default

The important thing regarding SIC time and the ATP certificate, is that ALL SIC time counts towards the 1500 TT as long as the airplane requires two pilots and it was conducted under 121 or 135 ops.

Here is a link to the FAA examiners manual which puts the regs into more easily understood language:

http://www.faa.gov/library/manuals/e...5/5_002_01.pdf


A. Total Pilot Flight Hours. A minimum of 1,500
total pilot flight hours must have been accumulated by
the applicant. The following types of flight experience
may be credited toward the total pilot flight hour
requirement:
• All pilot-in-command (PIC) hours
• All dual instruction received by the applicant
• All flight time acquired as a second-in-command
(SIC) in aircraft requiring at least two pilots by
the approved airplane flight manual (AFM), airworthiness
certificate, or in FAR Part 121 or 135
operations
• For commercial pilots, up to 500 hours of flight
engineer (FE) time acquired in FAR Part 121
operations (The FE time must have been
acquired in an airplane requiring an FE. While
acquiring these hours, the applicant must have
held a commercial pilot certificate and been participating
as a pilot or FE in a FAR Part 121
approved pilot training program. FE time may be
credited at a rate of 1 hour of pilot time for each 3
hours of FE time. For example, if the applicant
has accumulated 300 hours of FE time, 100 hours
may be credited toward the 1,500 total pilot hour
requirement.)

B. Hours as PIC. The applicant must have accumulated
at least 250 hours an PIC. SIC hours acquired while
performing the duties of PIC under the supervision of a
qualified PIC may be credited toward this requirement.

C. Hours of Cross-Country. At least 500 flight hours
must have been accumulated as a pilot in cross-country
flight. Cross-country time is that time acquired during
flight from a departure point to a destination point that is
not the same as the departure point. It is also time
acquired in a flight that is cross-country in nature even
though the departure and destination points are the same
(such as forestry patrol).

D. Hours of PIC Cross-Country. At least 100 flight
hours must have been accumulated as PIC while conducting
cross-country flight. SIC hours while performing the
duties of PIC under the supervision of a qualified PIC
may be credited toward this requirement.

E. Hours at Night. At least 100 hours must have been
accumulated as a pilot at night. An applicant who has
made over 20 night landings may thereafter substitute one
additional night takeoff and landing to a full stop for 1
hour of nighttime.

F. Hours as PIC at Night. At least 25 hours must have
been accumulated as a PIC at night. SIC hours while performing
the duties of PIC under the supervision of a qualified
PIC may be credited toward this requirement.

G. Instrument Hours. At least 75 hours must have
been accumulated as a pilot in actual or simulated instrument
conditions. Fifty hours of this time must have been
in actual flight
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ctd57
Major
4
08-04-2006 07:28 AM
newpilot
Regional
18
07-09-2006 02:17 PM
liv2soar
Major
2
06-13-2006 07:08 PM
stu4770
Cargo
16
04-04-2006 04:07 PM
8SugarSugar
Flight Schools and Training
1
03-26-2006 02:17 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Your Privacy Choices