Go Back  Airline Pilot Central Forums > Career Builder > Technical
Altimeter readings in other countries >

Altimeter readings in other countries

Notices
Technical Technical aspects of flying

Altimeter readings in other countries

Old 07-18-2014, 03:21 AM
  #1  
Wannabe
Thread Starter
 
Joined APC: Jul 2014
Position: PA-28 Student
Posts: 12
Thumbs down Altimeter readings in other countries

Hello everyone! This is a question for those who fly non US-aircraft
In places where metric system is standard, do you use meters for altitude or feet? And if so, on newer ac like the a320/777 can you switch from meters to feet?
DennyP is offline  
Old 07-18-2014, 03:56 AM
  #2  
Gets Weekends Off
 
Joined APC: Aug 2007
Position: I pilot
Posts: 2,049
Default

Most of the world uses altitude in feet, and in the rest of the world pressure settings are given in hectopascals (hPa). 1013.25hPa = 29.92 inches. You may hear people reference millibars, but officially ICAO uses hPa. 1013 hPa = 1013 mb
Former Soviet Union countries utilize altitude in meters and China also gives altitudes in meters . There are conversion charts depending in which country you are flyingg, but you are given altitude in meters and you reference the chart and get the conversion in feet.

US registered aircraft still follow these procedures when flying in these countries.
zondaracer is offline  
Old 07-18-2014, 04:28 AM
  #3  
Wannabe
Thread Starter
 
Joined APC: Jul 2014
Position: PA-28 Student
Posts: 12
Default

Originally Posted by zondaracer View Post
Most of the world uses altitude in feet, and in the rest of the world pressure settings are given in hectopascals (hPa). 1013.25hPa = 29.92 inches. You may hear people reference millibars, but officially ICAO uses hPa. 1013 hPa = 1013 mb
Former Soviet Union countries utilize altitude in meters and China also gives altitudes in meters . There are conversion charts depending in which country you are flyingg, but you are given altitude in meters and you reference the chart and get the conversion in feet.

US registered aircraft still follow these procedures when flying in these countries.
Ah ok, makes sense. But do all Chinese A/C use meters? If so that ought to be confusing for all the expat pilots who are used to feet
DennyP is offline  
Old 07-18-2014, 08:27 AM
  #4  
Prime Minister/Moderator
 
rickair7777's Avatar
 
Joined APC: Jan 2006
Position: Engines Turn Or People Swim
Posts: 39,097
Default

Originally Posted by DennyP View Post
Ah ok, makes sense. But do all Chinese A/C use meters? If so that ought to be confusing for all the expat pilots who are used to feet

You use the units in use by the controlling authority for whatever airspace you're in. Everybody on the radio talks in the same units, and those who need to do conversions do it in the privacy of their own cockpit, without bothering everyone else.
rickair7777 is offline  
Old 07-18-2014, 10:03 AM
  #5  
Gets Weekends Off
 
Joined APC: Jul 2008
Position: G550 & CL300 PIC
Posts: 369
Default

Originally Posted by DennyP View Post
Ah ok, makes sense. But do all Chinese A/C use meters? If so that ought to be confusing for all the expat pilots who are used to feet
It's not that Chinese aircraft use meters. It's all aircraft flying into China and Russia fly meters.

China:
Below RVSM: ATC assigns altitudes in meters. The pilot can fly meters if his altimeter is capable of displaying meters. Or he can use a chart to convert the meter into feet.

In RVSM: ATC assigns altitudes in meters. The pilot uses a chart to convert the meter into feet. He then flies the aircraft in feet. This is a requirement regardless of whether or not his altimeter can display feet.

It's important to note that all conversions must be made using the chart due to rounding. You can't use a calculator.

It's a little confusing at first, and so is reading back the altitudes in meters but you get used to it.
FlyingNasaForm is offline  
Old 07-18-2014, 02:34 PM
  #6  
Gets Weekends Off
 
Twin Wasp's Avatar
 
Joined APC: Oct 2007
Position: Sr. VP of button pushing
Posts: 2,726
Default

Russia went to Flight Levels in feet a few years ago but still uses meters below transition. Plus they have a thing for QFE and sometimes forget even if you ask for QNH.
Twin Wasp is offline  
Old 07-18-2014, 02:40 PM
  #7  
Gets Weekends Off
 
M696's Avatar
 
Joined APC: Dec 2012
Position: 747
Posts: 115
Default

Some newer aircraft do allow for displaying meters alongside feet. Pretty nice feature.
M696 is offline  
Old 07-18-2014, 03:22 PM
  #8  
Gets Weekends Off
 
galaxy flyer's Avatar
 
Joined APC: May 2010
Position: Baja Vermont
Posts: 5,168
Default

twin wasp

Or, just set QFE and fly the QFE heights!

GF
galaxy flyer is online now  
Old 07-18-2014, 06:30 PM
  #9  
Gets Weekends Off
 
Joined APC: May 2010
Posts: 342
Default

Originally Posted by M696 View Post
Some newer aircraft do allow for displaying meters alongside feet. Pretty nice feature.
Your feet aren't just for kicking tires.
EasternATC is offline  
Old 07-22-2014, 12:05 AM
  #10  
Gets Weekends Off
 
Joined APC: Jul 2007
Position: 744 CA
Posts: 4,772
Default

Originally Posted by galaxy flyer View Post
twin wasp

Or, just set QFE and fly the QFE heights!

GF
Ops Specs at MANY companies do not allow this
HercDriver130 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
FNG1
Technical
6
11-08-2011 11:00 PM
snippercr
Flight Schools and Training
5
07-10-2011 07:29 AM
Mattio
Technical
14
01-25-2011 02:47 PM
hurricanechaser
Flight Schools and Training
9
01-21-2011 05:58 PM
Flaps50
Cargo
10
03-16-2008 09:18 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Thread Tools
Search this Thread
Your Privacy Choices