Go Back  Airline Pilot Central Forums > Pilot Lounge > Aviation Law
Sidestep Approach Minimums >

Sidestep Approach Minimums

Notices
Aviation Law Legal issues, FARs, and questions

Sidestep Approach Minimums

Old 03-11-2010, 02:59 PM
  #1  
Gets Weekends Off
Thread Starter
 
Joined APC: Dec 2007
Posts: 101
Default Sidestep Approach Minimums

If you are coming in on an ILS to parallel runways, and you have to sidestep to the parallel runway, would you use straight in DA or circle to land MDA?
ccjaxpilot is offline  
Old 03-11-2010, 04:11 PM
  #2  
Gets Weekends Off
 
Twin Wasp's Avatar
 
Joined APC: Oct 2007
Position: Sr. VP of button pushing
Posts: 2,726
Default

Why not use the side step minimums?
Twin Wasp is offline  
Old 03-11-2010, 05:21 PM
  #3  
Gets Weekends Off
 
TheFly's Avatar
 
Joined APC: Feb 2006
Position: Seat 0B
Posts: 2,300
Default

Originally Posted by ccjaxpilot View Post
If you are coming in on an ILS to parallel runways, and you have to sidestep to the parallel runway, would you use straight in DA or circle to land MDA?

The runways need to be within 1200' of each other in order to sidestep. Otherwise, technically it's a circle. If side step mins are published, you can use them as well. Hope that helps.
TheFly is offline  
Old 03-11-2010, 07:37 PM
  #4  
Line Holder
 
Joined APC: May 2008
Posts: 25
Default

AIM 5-4-19 outlines the Side-Step Maneuver. Practically speaking, you would shoot the approach to the straight-in nonprecision minimums (the MDA) regardless of the approach (PA, APV or NPA) and side-step whenever visual is made with the parallel runway. Very specifically, you do not use the circling minimums if the parallel runway is within 1200 ft. (This illustrates the point of the side-step manuever, to take advantage of straight-in minimums to the parallel runway rather than the higher circling mins.)
Rustee is offline  
Old 03-12-2010, 04:28 AM
  #5  
Gets Weekends Off
Thread Starter
 
Joined APC: Dec 2007
Posts: 101
Default

Thanks for the help!
ccjaxpilot is offline  
Old 03-12-2010, 06:02 AM
  #6  
Organizational Learning 
 
TonyC's Avatar
 
Joined APC: Nov 2005
Position: Directly behind the combiner
Posts: 4,948
Default

Originally Posted by Rustee View Post

AIM 5-4-19 outlines the Side-Step Maneuver.

TRUE.


Originally Posted by Rustee View Post

Practically speaking, you would shoot the approach to the straight-in nonprecision minimums (the MDA) regardless of the approach (PA, APV or NPA) ...

FALSE.

A Side-Step Maneuver is flown to Side-Step Maneuver Minimums. Those landing minimums will be based on non-precision approach criteria, and therefore higher than the precision minimums, but they will normally be lower than published circling minimums. However, that does not mean the Non-Precision Minimums for the Straight-In approach can be used as the Side-Step Maneuver Minimums.


Originally Posted by Rustee View Post

... and side-step whenever visual is made with the parallel runway.

TRUE. Pilots are expected to commence the side-step maneuver as soon as possible after the runway or runway environment is in sight.


Originally Posted by Rustee View Post

Very specifically, you do not use the circling minimums if the parallel runway is within 1200 ft.

FALSE.

The minimums you use does not depend on the distance between the runways. The minimums you use depends ONLY on the approach clearance you receive. If you are cleared for the LOC 23R, you use the non-precision straight-in minimums for the LOC 23R approach. If you are cleared the LOC 23R Side-step 23L, you use the non-precision Side-step minimums for LOC 23R. If you are cleared the LOC 23R Circle to land 23L, you use the circling minimums for LOC 23R.

To repeat, you use the minimums for the approach clearance you receive.


Originally Posted by Rustee View Post

(This illustrates the point of the side-step manuever, to take advantage of straight-in minimums to the parallel runway rather than the higher circling mins.)

FALSE.

The Side-step maneuver usually has minimums lower than the published circling minimums, but it does not use the straight-in minimums for the approach flown. The Side-step maneuver has Side-Step Maneuver Minimums (AIM 5-4-20.d.). The same maneuver without Side-Step Maneuver Minimums is called a "circle to land" and uses CIRCLING MINIMUMS.



Here's an example of an approach with Side-step minimums: NEWARK LIBERTY INTL (EWR) ILS or LOC RWY 4R

Notice the minimums for "SIDESTEP RWY 4L". They are lower than the circling minimums, but higher than the S-LOC 4R minimums. The same is true for NEWARK LIBERTY INTL (EWR) ILS or LOC RWY 4L SIDESTEP RWY 4R.


Look at DFW and LAX for examples of approaches where the Side-Step MDAs are significantly higher than the LOC MDAs, but no circling minima are published for the same approach.


Once again, for clarity, a Side-Step Maneuver uses Side-Step Maneuver Minimums. Without Side-Step Maneuver Minimums, there can be no Side-Step Maneuver.






.
TonyC is offline  
Old 03-12-2010, 03:56 PM
  #7  
Line Holder
 
Joined APC: May 2008
Posts: 25
Default

I am under the impression that if side-step minimums are not published, but the runway configuration is such that it still allows for the side-step, then the minimums used are those of the straight-in nonprecision to the parallel runway. (If side-step minimums are published, obviously you would fly those, as you have pointed out.)

Originally Posted by TonyC
The minimums you use does not depend on the distance between the runways. The minimums you use depends ONLY on the approach clearance you receive. If you are cleared for the LOC 23R, you use the non-precision straight-in minimums for the LOC 23R approach. If you are cleared the LOC 23R Side-step 23L, you use the non-precision Side-step minimums for LOC 23R. If you are cleared the LOC 23R Circle to land 23L, you use the circling minimums for LOC 23R.

To repeat, you use the minimums for the approach clearance you receive.
Thanks for the correction and clarification. Yes, if you are cleared to circle, you would use circling minimums. I meant to say that the point of the side-step maneuver is so lower than circling minimums may be used (either as published side-step mins or as the straight-in nonprecision mins). Otherwise, what would be it's purpose?

Originally Posted by TonyC
Without Side-Step Maneuver Minimums, there can be no Side-Step Maneuver.
Again, it was my understanding that you can still side-step even if there are not side-step minimums published on the IAP. Maybe there is a source that can corroborate your statement?
Rustee is offline  
Old 03-12-2010, 04:41 PM
  #8  
Organizational Learning 
 
TonyC's Avatar
 
Joined APC: Nov 2005
Position: Directly behind the combiner
Posts: 4,948
Default

While I look for such a source, let me ask: Can you circle without circling minimums?

<and why are there no emoticons in this Forum?>

<wink emoticon goes here>




.
TonyC is offline  
Old 03-12-2010, 04:54 PM
  #9  
Gets Weekends Off
 
USMCFLYR's Avatar
 
Joined APC: Mar 2008
Position: FAA 'Flight Check'
Posts: 13,835
Default

Originally Posted by TonyC View Post
While I look for such a source, let me ask: Can you circle without circling minimums?

<and why are there no emoticons in this Forum?>

<wink emoticon goes here>




.
The EEftPP reference book uses AIM 5-4-18 and states:

1. ATC may authorize a nonprecision approach procedure which serves either one of the parallel runways that are separated by ,1200 feet or less followed by a straight-in landing on the adjacent runway.
2. Aircraft that will execute a side-step maneuver will be cleared for a specified nonprecision approach and landing on the adjacent parallel runway. Example "cleared ILS runway 7 left appraoch, side-step to runway 7 right." Pilots are expected to commence the side-step maneuver as soon as possible after the runway or runway environment is in sight.
3. Landing minimums to the adjacent runway will be based on nonprecision criteria and therefore higher than the precision minimums to the primary runway, but will normally be lower than the published circling minimums
Using the above reference (AIM), it seems to say that if the runways are within 1,200 fet of each other then you can shoot the NP approach using the NP mins for the one you are shooting, then plan to side-step and do so ASAP. I assume this means then that you could shoot this approach and plan to side-step without actual side-step minimums. Also assuming that you would have to have separate side-step mins if the runways are further than said 1,200 feet apart and may be the case in the examples posted above (I didn't look).

USMCFLYR
USMCFLYR is offline  
Old 03-12-2010, 05:06 PM
  #10  
Gets Weekends Off
 
Joined APC: Jan 2010
Posts: 327
Default

I agree with Rustee and USMCFLYR that published side-step minimums are NOT required to execute a side-step maneuver. But the question of which minimums to use is a good one. USMCFLYR suggests using the NP mins for the approach you are using, making perfect sense.

"Compliance with minimum altitudes associated with stepdown fixes is expected even after the side-step maneuver is initiated."

So the minimums change, depending on which runway you are lined-up with. Perhaps the only time this is not true is when side-step minimums are published, for whatever reason.

Last edited by AKASHA; 03-12-2010 at 05:27 PM.
AKASHA is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
tortue
Major
7
05-24-2009 09:06 AM
caboarder2001
Aviation Law
28
03-30-2009 03:13 PM
aviator921
Regional
49
08-13-2008 12:01 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Thread Tools
Search this Thread
Your Privacy Choices