WS Question
#1
Super Moderator
Thread Starter
Joined APC: Dec 2007
Position: DAL 330
Posts: 6,868
WS Question
How do you put in a WS for LAX if you don’t want a BUR or ONT trip?
The template has a space to authorize co-domicile terminals. If I leave this blank will it only award LAX trips?
Thanks Scoop
The template has a space to authorize co-domicile terminals. If I leave this blank will it only award LAX trips?
Thanks Scoop
#2
Gets Weekends Off
Joined APC: Oct 2012
Position: Sic semper tomato
Posts: 275
99.9% sure that's correct, you have to authorize the co-terminal. If you don't, PCS will only award "organic" trips that originate in the hub. Verify my .1% of uncertainty but I think that's correct.
#4
Gets Weekends Off
Joined APC: Jun 2015
Posts: 3,117
Nope....the default is to assume any co-terminal is acceptable. (Spoken from 18+ years of experience in NYC). When you fill out your WS template, on the secondary screen you will need to select "Rotation Parameters" (4th option down?) and then check the "Acceptable Rotation Begin Co-Terminal Cities" box and type in "LAX" and I would also do the same for "Acceptable Rotation End Co-Terminal Cities" unless you are okay with them "ground trans-ing" you back to LAX.
#5
Gets Weekends Off
Joined APC: Oct 2012
Position: Sic semper tomato
Posts: 275
Nope....the default is to assume any co-terminal is acceptable. (Spoken from 18+ years of experience in NYC). When you fill out your WS template, on the secondary screen you will need to select "Rotation Parameters" (4th option down?) and then check the "Acceptable Rotation Begin Co-Terminal Cities" box and type in "LAX" and I would also do the same for "Acceptable Rotation End Co-Terminal Cities" unless you are okay with them "ground trans-ing" you back to LAX.
Thread
Thread Starter
Forum
Replies
Last Post
RVSM Certified
Flight Schools and Training
22
02-27-2009 12:04 PM