Go Back  Airline Pilot Central Forums > Career Builder > Engineers & Technicians
A&P travel tool kit recommendations >

A&P travel tool kit recommendations

Notices
Engineers & Technicians Aeronautical engineering and aircraft MX

A&P travel tool kit recommendations

Old 10-20-2019, 04:53 PM
  #1  
Line Holder
Thread Starter
 
Joined APC: Jun 2019
Posts: 48
Default A&P travel tool kit recommendations

What does everyone take with them on a standard "road call", "fly out" maintenance job?
I have just a standard tool bag that I fill my most used tools, but have seen some new tool rolls and waterproof pelican tool boxes recently.
Anyone had luck with either of these?
What is your top tool recommend to bring when you travel away from the shop?
cubpilot802 is offline  
Old 10-22-2019, 10:15 AM
  #2  
Line Holder
 
Joined APC: Oct 2017
Posts: 45
Default

I personally have a Stanley plastic box with larger wheels on it with tool rolls for a semblance of FOD and tool control. This is probably the cheapest route, but occasionally you have to reorganize everything- it’s not as good as shadowing with foam, but it’s still effective.

I have a full tool set that permanently stays in the back of my truck since I’m a helicopter EMS base mechanic that has a 1 hour call out 24 hours/5 days a week. Generally, these are my cheaper tools that aren’t as valuable but it’s still probably over $3K worth.

A few guys at my company have went to the Milwaukee/Stanley/Craftsman “stacker” boxes that seem to work really well. I haven’t gone this direction since my box has to stay under my truck bed cover. It’d be great for someone that has an SUV. Another individual got a few Harbor Freight suitcase type boxes that have been shadowed. A few guys have knock off pelican cases that seem to work really well.

What kind of aircraft are you working on? Do you have a short call out response time as well? Are you flying on the airlines to the worksite?

One thing is for sure, check your company’s policy on replacing lost or stolen tools and have something in writing. Some require you to have a list or take pictures. If you don’t have documentation, and your tools are lost/stolen, you’re out of luck. I had a friend that had $10K worth of Snap-On tools stolen from his truck. Luckily, he had full documentation and was reimbursed every cent.
4020Driver is offline  
Old 10-25-2019, 09:52 AM
  #3  
Line Holder
Thread Starter
 
Joined APC: Jun 2019
Posts: 48
Default

Originally Posted by 4020Driver View Post
I personally have a Stanley plastic box with larger wheels on it with tool rolls for a semblance of FOD and tool control. This is probably the cheapest route, but occasionally you have to reorganize everything- it’s not as good as shadowing with foam, but it’s still effective.

I have a full tool set that permanently stays in the back of my truck since I’m a helicopter EMS base mechanic that has a 1 hour call out 24 hours/5 days a week. Generally, these are my cheaper tools that aren’t as valuable but it’s still probably over $3K worth.

A few guys at my company have went to the Milwaukee/Stanley/Craftsman “stacker” boxes that seem to work really well. I haven’t gone this direction since my box has to stay under my truck bed cover. It’d be great for someone that has an SUV. Another individual got a few Harbor Freight suitcase type boxes that have been shadowed. A few guys have knock off pelican cases that seem to work really well.

What kind of aircraft are you working on? Do you have a short call out response time as well? Are you flying on the airlines to the worksite?

One thing is for sure, check your company’s policy on replacing lost or stolen tools and have something in writing. Some require you to have a list or take pictures. If you don’t have documentation, and your tools are lost/stolen, you’re out of luck. I had a friend that had $10K worth of Snap-On tools stolen from his truck. Luckily, he had full documentation and was reimbursed every cent.
Thanks for all the great information!
Currently finishing up my A&P apprenticeship and just trying to gauge if I have missed some good road techniques/tips. In the past have taken a company airplane with the IA and myself flying then assisting. Usually end up in a baron or a cherokee.
Mostly work on small single/ multi pistons.
We do not have any official short call time, but we like to be on sight within a couple hours (our operation range is no further than 1 hr flight time).

In the spring, I hope to move on to a new full time pilot position but expect to also have a maintenance roll as well.
cubpilot802 is offline  
Old 10-30-2019, 02:23 PM
  #4  
Gets Weekends Off
 
Joined APC: Jun 2015
Posts: 115
Default

Originally Posted by cubpilot802 View Post
What does everyone take with them on a standard "road call", "fly out" maintenance job?
I have just a standard tool bag that I fill my most used tools, but have seen some new tool rolls and waterproof pelican tool boxes recently.
Anyone had luck with either of these?
What is your top tool recommend to bring when you travel away from the shop?
It's been a while for me but we'd launch with 1/4 and 3/8 ratchet/socket set with extensions & wobblers, battery powered drill(Milwaukee) with drill bit and driver bit set , stubby wrench set, Hex/allen set or bits, stubby snapon screw driver(ratcheting). Mirror, dikes, torches, needle nose pliers, safety wire pliers(that barely worked)safety wire, speed tape. Of course depending on the job we'd throw in more. Once in a while we'd launch a second 172/82/cherokee (or whatever we had) for bigger items like jacks/specialty tools/wood.

Those were good times. Miss those days, pushing paper now.
geosync is offline  
Old 10-31-2019, 04:24 PM
  #5  
Line Holder
Thread Starter
 
Joined APC: Jun 2019
Posts: 48
Default

Originally Posted by geosync View Post
It's been a while for me but we'd launch with 1/4 and 3/8 ratchet/socket set with extensions & wobblers, battery powered drill(Milwaukee) with drill bit and driver bit set , stubby wrench set, Hex/allen set or bits, stubby snapon screw driver(ratcheting). Mirror, dikes, torches, needle nose pliers, safety wire pliers(that barely worked)safety wire, speed tape. Of course depending on the job we'd throw in more. Once in a while we'd launch a second 172/82/cherokee (or whatever we had) for bigger items like jacks/specialty tools/wood.

Those were good times. Miss those days, pushing paper now.
Thanks! Traveling to an airplane is always an adventure. Learn more on every call.
cubpilot802 is offline  
Old 07-25-2023, 11:20 AM
  #6  
New Hire
 
Joined APC: Jul 2023
Posts: 1
Default -

I want to lift my truck and would like to know what you guys would recommend, new to the truck life so don’t know what is good and what is not.

Thanks


Sent from my iPhone using Tapatalk
Henrygrien is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
PinnacleFO
Regional
53
12-13-2010 12:04 PM
Radar
Regional
32
05-02-2009 06:01 PM
UnlimitedAkro
Hangar Talk
3
03-14-2008 12:47 PM
olden208
Major
2
10-14-2007 07:28 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Thread Tools
Search this Thread
Your Privacy Choices