Logging Time
#1
Logging Time
Hello,
I have a bunch of questions about logging time ... so here we go:
1) I'm an IFR student, and the new school I transfered to has an Elite RC-1 FTD. The CFI logged my flight today the exact way you will log a regular flight (including approaches, landings, and ASEL and TOTAL TIME) the only difference is that he also put Sim Time. The sim is brand new ... and they didn't have that much experience with it ... so my question is the following:
How should I log sim time?
2) He mentioned that is possible for me to do cross countries in the sim (to satisfy the 50h requirement) ... is that possible?
3) Can you log both dual and PIC at the same time? My previous flight instructor didn't do that ... he only logged dual time not PIC time for our IFR lessons.
4) I can do 20 hours worth of training for my IFR in the sim ... 20 hours of doing what? What are the limitations?
I have a bunch of questions about logging time ... so here we go:
1) I'm an IFR student, and the new school I transfered to has an Elite RC-1 FTD. The CFI logged my flight today the exact way you will log a regular flight (including approaches, landings, and ASEL and TOTAL TIME) the only difference is that he also put Sim Time. The sim is brand new ... and they didn't have that much experience with it ... so my question is the following:
How should I log sim time?
2) He mentioned that is possible for me to do cross countries in the sim (to satisfy the 50h requirement) ... is that possible?
3) Can you log both dual and PIC at the same time? My previous flight instructor didn't do that ... he only logged dual time not PIC time for our IFR lessons.
4) I can do 20 hours worth of training for my IFR in the sim ... 20 hours of doing what? What are the limitations?
#2
1) FTD time should only be logged as simulator and dual received, plus the approaches. No total time, no ASEL, no landings, no simulated (hood) instrument. Fix it now, save yourself from headache later.
2) I'm pretty sure FTD time doesn't count as cross country.
3) Yes you can have both so long as you are the sole manipulator of the controls in an aircraft for which you are rated.
4) Check the reg's but it should say something like: 20 hours in a simulator may be used to satisfy the requirements of 61.XX(y) (aeronautical experience). Find the reg, and it shall spell out what you can work on. It should include all the standard instrument stuff: IR maneuvers, approaches, holds, full/partial panel stuff, etc.
Best of luck on the instrument rating.
2) I'm pretty sure FTD time doesn't count as cross country.
3) Yes you can have both so long as you are the sole manipulator of the controls in an aircraft for which you are rated.
4) Check the reg's but it should say something like: 20 hours in a simulator may be used to satisfy the requirements of 61.XX(y) (aeronautical experience). Find the reg, and it shall spell out what you can work on. It should include all the standard instrument stuff: IR maneuvers, approaches, holds, full/partial panel stuff, etc.
Best of luck on the instrument rating.
#3
Hello,
I have a bunch of questions about logging time ... so here we go:
1) I'm an IFR student, and the new school I transfered to has an Elite RC-1 FTD. The CFI logged my flight today the exact way you will log a regular flight (including approaches, landings, and ASEL and TOTAL TIME) the only difference is that he also put Sim Time. The sim is brand new ... and they didn't have that much experience with it ... so my question is the following:
How should I log sim time?
2) He mentioned that is possible for me to do cross countries in the sim (to satisfy the 50h requirement) ... is that possible?
3) Can you log both dual and PIC at the same time? My previous flight instructor didn't do that ... he only logged dual time not PIC time for our IFR lessons.
4) I can do 20 hours worth of training for my IFR in the sim ... 20 hours of doing what? What are the limitations?
I have a bunch of questions about logging time ... so here we go:
1) I'm an IFR student, and the new school I transfered to has an Elite RC-1 FTD. The CFI logged my flight today the exact way you will log a regular flight (including approaches, landings, and ASEL and TOTAL TIME) the only difference is that he also put Sim Time. The sim is brand new ... and they didn't have that much experience with it ... so my question is the following:
How should I log sim time?
2) He mentioned that is possible for me to do cross countries in the sim (to satisfy the 50h requirement) ... is that possible?
3) Can you log both dual and PIC at the same time? My previous flight instructor didn't do that ... he only logged dual time not PIC time for our IFR lessons.
4) I can do 20 hours worth of training for my IFR in the sim ... 20 hours of doing what? What are the limitations?
I would also be wary about adding dual and PIC. Here's the reason: right now you may have low flight time and every hour counts. Believe me I remember that time. Someday however, you will get to an interview. I'm not sure about the regional but the major interview when it comes they will be exact on your flight time. They will do a simple addition of multi- and single and see if it equals TT. They will also add up PIC, SIC and Dual. If these numbers don't add up you will have to explain in the interview. They will argue back depending on the interviewer and I would hate to see you not get a major job over an accounting error in your logbook. 20,50, even 100 hours may seem like a lot now but someday it won't. The only thing you will care about is accuracy in front of an interview panel.
You can make any logbook correction by making a new entry and subtracting the time in the appropriate column. Then in the remarks you can add "Subtracted xx PIC hours to account for dual given". Sign your name and the FAA, Interviewers and everyone will be happy.
I used to give interviews so this is the most correct way to do it. Good luck.
#4
Reference FAR 61.65 (d) and (e).
FAR 141.4(b) talks about how much sim time you can use to substitute for required instrument instruction.
Far141.4(c) talks about airplane instruction, including airplane cross country instruction.
Joe
FAR 141.4(b) talks about how much sim time you can use to substitute for required instrument instruction.
Far141.4(c) talks about airplane instruction, including airplane cross country instruction.
Joe
#5
FTD time could never be logged as actual XC. What get's confusing is that regs in some cases say that you can SUBSTITUTE a type of training for a experience requirement...in this case you can substitute sim for the XC flight time. This does NOT mean that the sim BECOMES XC, it is still just sim time flown in a XC profile. Do not log it as XC.
If you miss-log some of this stuff, it will make your life hard when you have to explain it at an interview...instead of selling yourself to the best of your ability, you will be sitting in a corner under a cloud of suspicion, frantically punching a calculator to arrive at some totals which make sense to the interviewer.
#6
I would only log FTD as sim, never dual. Dual is instruction recieved in an airplane. Sim time is NEVER valid without an instructor, so it is assumed by definition that sim time is also dual.
FTD time could never be logged as actual XC. What get's confusing is that regs in some cases say that you can SUBSTITUTE a type of training for a experience requirement...in this case you can substitute sim for the XC flight time. This does NOT mean that the sim BECOMES XC, it is still just sim time flown in a XC profile. Do not log it as XC.
If you miss-log some of this stuff, it will make your life hard when you have to explain it at an interview...instead of selling yourself to the best of your ability, you will be sitting in a corner under a cloud of suspicion, frantically punching a calculator to arrive at some totals which make sense to the interviewer.
FTD time could never be logged as actual XC. What get's confusing is that regs in some cases say that you can SUBSTITUTE a type of training for a experience requirement...in this case you can substitute sim for the XC flight time. This does NOT mean that the sim BECOMES XC, it is still just sim time flown in a XC profile. Do not log it as XC.
If you miss-log some of this stuff, it will make your life hard when you have to explain it at an interview...instead of selling yourself to the best of your ability, you will be sitting in a corner under a cloud of suspicion, frantically punching a calculator to arrive at some totals which make sense to the interviewer.
FTD does not count toward any FLIGHT time.
#7
Gets Weekends Off
Joined APC: Mar 2008
Position: 135 FO
Posts: 148
What are they looking for PIC+SIC+Dual to add up to? It seems like that would normally be way more than total time, as students should be logging PIC and Dual for most instruction they receive.
#8
The usual deal with airlines is they want a breakdown of:
- PIC, but excluding dual received OR given. This would be your actual flying time with no instruction occuring.
- SIC
- Dual Given
- Dual Received
There's no particular way they should add up, but a very high amount of dual received might not be good...this could indicate either a very slow learner (who will not complete 121 training) or some very "creative" time building.
Recall that JFK junior had a very large amount of instruction towards his IR, but no rating to show for it...
#9
Gets Weekends Off
Joined APC: Mar 2008
Position: 135 FO
Posts: 148
Thanks rickair... that makes a lot more sense. My employer has our students log Sim/FTD and Dual for instruction that occurs in the sim, and then we subtract that Dual back out when they do their 8710s. It seems like it's adding a needless extra step to me, but what can I say... they like paperwork here.
Since I trained at the same place I work, my FTD time is logged this way as well. I guess if asked in an interview, I'll just explain the logging method.
Since I trained at the same place I work, my FTD time is logged this way as well. I guess if asked in an interview, I'll just explain the logging method.
#10
Thanks rickair... that makes a lot more sense. My employer has our students log Sim/FTD and Dual for instruction that occurs in the sim, and then we subtract that Dual back out when they do their 8710s. It seems like it's adding a needless extra step to me, but what can I say... they like paperwork here.
Since I trained at the same place I work, my FTD time is logged this way as well. I guess if asked in an interview, I'll just explain the logging method.
Since I trained at the same place I work, my FTD time is logged this way as well. I guess if asked in an interview, I'll just explain the logging method.
What I would do, after you finish filling up your current page in your logbook, is subtract the total "dual" received in FTDs from your current total dual received. That should give you your total dual-airplane time. Then adjust your dual column accordingly in the totals at the bottom of the page to reflect your total dual-airplane time. Do the same for total time and cross-country time if you logged it in those columns as well. Also, put a note in the bottom margin of the page that says something to the effect of, "Dual, cross-country, and total time has been adjusted X hours for dual, cross-country, and total time logged in FTDs." Then date and initial the note. Now you can start on a new page with the correct numbers and your times should add up as rick mentioned earlier.
I made a similar mistake when I was going through my instrument (which an examiner caught) and I adjusted for it and made the note at the bottom. It's a lot easier and makes your logbook look a lot cleaner than if you were to go in there and green all of it out. No one mentioned it when I interviewed with several airlines earlier this year and I got hired.
Thread
Thread Starter
Forum
Replies
Last Post
captain_drew
Flight Schools and Training
38
12-05-2012 08:29 AM