A320 cupholder
#11
So I’ve heard.
#12
Maybe wrap the bottom with duct tape to get the perfect fit?
#14
Gets Weekends Off
Joined APC: Jul 2013
Posts: 4,669
Sorry man
That’s what I used to do.
Just have to be careful as to how full the cup is in relation to the sip hole and “click” position.
Also, depending on technique, if holding the cup from the top you have to make sure you didn’t accidentally pop/loosen the lid.
We have the QRH in the cubby next to the seat, that’s about 6” wide. I take a can of anything from the galley and drop it next to the QRH. I can then put my cup on top of that during takeoff. It’s secured by the sides of the cubby and the QRH and sticks out enough to grab it because of the can.
Just have to be careful as to how full the cup is in relation to the sip hole and “click” position.
Also, depending on technique, if holding the cup from the top you have to make sure you didn’t accidentally pop/loosen the lid.
#15
Gets Weekends Off
Thread Starter
Joined APC: Aug 2008
Position: 320
Posts: 425
Thread
Thread Starter
Forum
Replies
Last Post