L-3/Dynamic/Avenge
#501
New Hire
Joined APC: Jun 2019
Posts: 1
Clearances
Hello all I, am new to the group. I have recently accepted an offer with DA. I have filled the forms for the clearance and am now waiting. It is still pretty unclear of what a time frame is for these clearances to go through, seems like lot is of change is happing in the government. I知 waiting on a secret. I知 prior military and once had a secret eligible adjudicated back in 2011, since then I have kept my nose clean, had no troubles with the law, good credit and do not have ties to any foreign entities. Wondering also how often people get interim clearances and how long those take. I understand these go case by case basis. Can anyone shed light on what the average wait times are and how quickly people get to the next step? This process makes me anxious and I really want to get to work.
Thanks,
Thanks,
#502
New Hire
Joined APC: Jan 2019
Posts: 5
Clearance time frame
PM sent
filler
filler
Hello all I, am new to the group. I have recently accepted an offer with DA. I have filled the forms for the clearance and am now waiting. It is still pretty unclear of what a time frame is for these clearances to go through, seems like lot is of change is happing in the government. I知 waiting on a secret. I知 prior military and once had a secret eligible adjudicated back in 2011, since then I have kept my nose clean, had no troubles with the law, good credit and do not have ties to any foreign entities. Wondering also how often people get interim clearances and how long those take. I understand these go case by case basis. Can anyone shed light on what the average wait times are and how quickly people get to the next step? This process makes me anxious and I really want to get to work.
Thanks,
Thanks,
#504
4.3.3. Engineering Test, Check Flights, and all other flights.
4.3.3.1. Pilot. The pilot must be qualified in mission, type, design, and if appropriate, series of aircraft. The pilot must have not less than 1,000 hours Pilot-in-Command time. In addition,
4.3.3.1.1. For fighter, attack, and trainer aircraft, the Pilot-in-Command time must include 100 hours in the same aircraft type and design.
4.3.3.1.2. The Pilot-in-Command time for other aircraft must include 300 hours in similar aircraft type.
4.3.3.2. Copilot. The copilot must have not less than 500 hours Pilot-in-Command time and be qualified in mission, type, design, and if appropriate, series aircraft.
A lot of numbers above that show up as common across OCONUS ISR positions/operators so no real surprise they're hard requirements
I did see today two L3 SIC OCONUS Afghanistan Positions where one required 1700 tt fixed wing with 1000 PIC and the second 1000 tt fixed wing with 500 PIC. No reason I could see for the difference other than maybe their individual contract requirements. Substantial increase for sure though I admit I'm a little surprised they're up in todays hiring environment.
#505
If I am not mistaken, the 1700/1000 announcement is targeting high time and experienced SE Fighter, RW or Osprey folks with very low FWME time. They should be targeted for PIC upgrade after 300 hours provided they can achive the required standards. A lot of those folks do longer first rotations so they can go through upgrade training quite early into their second trip. 1000/500 folks would be SIC for 180 days on site. What PIC or SIC employment status you are hired as is up to the Chief Pilot.
#506
If I am not mistaken, the 1700/1000 announcement is targeting high time and experienced SE Fighter, RW or Osprey folks with very low FWME time. They should be targeted for PIC upgrade after 300 hours provided they can achive the required standards. A lot of those folks do longer first rotations so they can go through upgrade training quite early into their second trip. 1000/500 folks would be SIC for 180 days on site. What PIC or SIC employment status you are hired as is up to the Chief Pilot.
#507
Line Holder
Joined APC: Oct 2018
Posts: 93
The company minimums are not to be confused with the contract minimums. DCMA 8210 dictates the bare minimums. L3 has been holding the the most lucrative ISR contract for years and will not likely risk losing it by hiring PICs with the bare minimum of hours in case something happens. In my opinion, L3's contract is the most demanding and involved form of ISR for the pilots (the pilots who care anyways). There is a lot of responsibility for someone hired directly to a PIC position and chief pilots will not hesitate to send someone home who can't make the grade through training.
#508
The company minimums are not to be confused with the contract minimums. DCMA 8210 dictates the bare minimums. L3 has been holding the the most lucrative ISR contract for years and will not likely risk losing it by hiring PICs with the bare minimum of hours in case something happens. In my opinion, L3's contract is the most demanding and involved form of ISR for the pilots (the pilots who care anyways). There is a lot of responsibility for someone hired directly to a PIC position and chief pilots will not hesitate to send someone home who can't make the grade through training.
#509
New Hire
Joined APC: Jun 2019
Posts: 1
Looking for Guidance
Have 1960 TT / 1110 PIC / 1850 AMEL with a commercial, multi-engine land, instrument rating and type in L-188. Also did 9 yrs of P-3 sim IP over the last 10 years with conservatively somewhere in the neighborhood of 9500 hours of IP time although nothing in logbook - studs got all the time. Also have active Secret clearance. Wondering if a worthwhile candidate even if my last aircraft flight was 10 yrs ago?
#510
New Hire
Joined APC: May 2019
Posts: 1
Have 1960 TT / 1110 PIC / 1850 AMEL with a commercial, multi-engine land, instrument rating and type in L-188. Also did 9 yrs of P-3 sim IP over the last 10 years with conservatively somewhere in the neighborhood of 9500 hours of IP time although nothing in logbook - studs got all the time. Also have active Secret clearance. Wondering if a worthwhile candidate even if my last aircraft flight was 10 yrs ago?