![]() |
Uniform questions
I've been looking, even asking at some of the local uniform shops, but does someone know where I can get a company issued tie converted to a zipper tie, and if someone will embroider company wings on shirts?
|
And why cant you just buy a zipper tie?
|
And why cant you just buy a zipper tie? |
Cut the logo off an existing tie and have it sewn onto a zip tie?
|
Step 1. Tie your current tie.
step 2. Then loosen it around your neck about 1 1/2-2 inches. Step 3. Now cut the piece that would be around the back of your neck. Step 4. Buy and sew a square of Velcro to either side. Step 5. Velcro tie in place, just as good as a zipper tie and in the unlikely event a terrorist or jack*** feels its necessary to grab your tie to choke or bring you closer, you will have the last laugh! |
And someone will now post about how zipper ties are "unprofessional" in
3...2...1.... |
Love my zipper tie. !!!!
|
I wish every tie I had was a zipper tie.
|
Originally Posted by The Juice
(Post 1284410)
And someone will now post about how zipper ties are "unprofessional" in
3...2...1.... JK, i honestly cant tell the difference between a Z tie or a regular one...at least i never look that close at anyone. |
Originally Posted by The Juice
(Post 1284410)
And someone will now post about how zipper ties are "unprofessional" in
3...2...1.... |
Why not just tie it once and slip it over your head the same way?
|
Originally Posted by Fly782
(Post 1284471)
Why not just tie it once and slip it over your head the same way?
|
Certainly not unprofessional, but I'd have a tough time taking myself seriously LoL. Like wearing velcro-sneakers!
|
I always had trouble keeping it up, after a couple hours it usually had begun to sag.
The zipper tie that is. I ended up returning to the standard model since clip on ties really do look like crap. |
Originally Posted by The Juice
(Post 1284410)
And someone will now post about how zipper ties are "unprofessional" in
3...2...1.... |
Originally Posted by gatorhater
(Post 1284606)
I always had trouble keeping it up, after a couple hours it usually had begun to sag.
The zipper tie that is. I ended up returning to the standard model since clip on ties really do look like crap. |
Originally Posted by The Juice
(Post 1284410)
And someone will now post about how zipper ties are "unprofessional" in
3...2...1.... Zipper ties look fine, you can't even tell. I don't like clip-ons but I wear one anyway because of the "break-away" feature...don't want some belligerent to choke me out with it. |
Originally Posted by rickair7777
(Post 1285003)
Zipper ties look fine, you can't even tell. I don't like clip-ons but I wear one anyway because of the "break-away" feature...don't want some belligerent to choke me out with it.
|
Originally Posted by DryMotorBoatin
(Post 1285011)
Is that something you believe there is a legitment risk of happening?
|
Originally Posted by Gearswinger
(Post 1285050)
Why practice V1 cuts
Regarding zipper ties, if yours is unzipping then you got a bad one. I had that problem with one once, returned it and the new one worked fine. |
Loved my zipper ties when I had them as well.....
|
Originally Posted by Gearswinger
(Post 1285050)
Why practice V1 cuts, is it something that you believe there is a legitimate risk of happening?
|
Originally Posted by DryMotorBoatin
(Post 1285121)
There is a very legitimate risk of an engine failure so its best to practice them using a worst case scenario (v1)
|
Originally Posted by Gearswinger
(Post 1285151)
There is also a risk that someone could try to control you by grabbing your tie, hence why some choose to wear a clip on. I don't, but I can understand why some do.
|
Zipper ties are like girlfriends, when one starts to sag and covered with stains, time to buy a new one, they're cheap enough :D
I hated those ties also until I borrowed one from a friend and I haven't looked back, I'm horrible at tying ties, so it works for me. Our ties are black and have a logo, but I might just stick to the plain black tie that I already have. What about wings being embroided? Does no one do that? |
Originally Posted by jsfBoat
(Post 1284203)
I've been looking, even asking at some of the local uniform shops, but does someone know where I can get a company issued tie converted to a zipper tie, and if someone will embroider company wings on shirts?
Classy ! On so many levels. |
I personally like the zipper ties made by A Cut Above Uniforms. They have a locking tab underneath that prevents them from slipping down.
|
| All times are GMT -8. The time now is 11:30 PM. |
Website Copyright © 2026 MH Sub I, LLC dba Internet Brands