Ethiopian 737 MAX 8 crash
#11
Gets Weekends Off
Joined APC: Oct 2005
Position: ERJ CAPT
Posts: 227

There was a time in the 60's when airlines were hiring off the street with 0 flight time. I've known a few guys (now retired) that were hired, trained by the airline right into aircraft. One guy started flying dc-9s for NorthEast.

#12
Gets Weekends Off
Joined APC: Feb 2006
Position: B-737NG preferably in first class with a glass of champagne and caviar
Posts: 5,684

Anyway back to reality.... it’s a normal progression for pilots with many airlines overseas.
135 operators hire pilots with minimal time too... essentially CFI time.
#13
Gets Weekends Off
Joined APC: Jan 2006
Posts: 222

Could be totally unrelated to Lion Air, but the elevator not being able to overpower the stab has always been a problem for Boeing on the 737. Having to trim, per manual, to recover from a stall as the elevator doesn't have enough authority is crazy.
Then on the MAX, first, the MCAS drives nose down stabilizer trim automatically based on the AOA, second, the stabilizer trim commands are NOT interrupted even when the control column is displaced in the opposite direction. A faulty AOA sensor then is all it takes. That leaves fiddling with switches to fix the problem.
Then on the MAX, first, the MCAS drives nose down stabilizer trim automatically based on the AOA, second, the stabilizer trim commands are NOT interrupted even when the control column is displaced in the opposite direction. A faulty AOA sensor then is all it takes. That leaves fiddling with switches to fix the problem.
#14
New Hire
Joined APC: Mar 2019
Posts: 3

Out of curiosity, do you know if MCAS would drive the nose down even if there's a positive rate of climb?
#16
Gets Weekends Off
Joined APC: Apr 2016
Position: 767
Posts: 107

Boeing tried to fix a problem that wasn’t there, and now they have blood on their hands. The FAA should ground all MAXs until MCAS is either fixed or disabled if there is no way to eliminate errant AOA input.
#18
weekends off? Nope...
Joined APC: Apr 2014
Posts: 1,597

Maneuvering Characteristic Augmentation System. Because of the shape of the Max motors and the fact they extend further forward ahead of the CG than other 737s, at high angles of attack the engine nacelle itself starts to produce lift which causes an additional pitch up moment. So they had to design a system to drive the nose down...
MCAS is supposed to be disabled with the flaps extended...will be curious to know the configuration of ET302 when they started to encounter issues.
#19

However in Europa-Land it’s very common to go right seat transport category Jet right out of flightschool with a CPL-ME/IR and a “frozen ATPL” aka 14 written exams passed.
Wasn’t but a couple of years ago that the regionals hired with 250hrs and 25ME.
Don’t know where Air Ethiopia does their training but I’d expect they send their cadets to an Airline academy.
From Pprune:
777 crew behind ET302 at holding point report observing normal takeoff followed shortly by declaration of emergency. They heard ET302 on tower frequency transmitting “Wrong airspeed indications and difficulty controlling aircraft.”
#20
Gets Weekends Off
Joined APC: Feb 2015
Posts: 625

Maneuvering Characteristic Augmentation System. Because of the shape of the Max motors and the fact they extend further forward ahead of the CG than other 737s, at high angles of attack the engine nacelle itself starts to produce lift which causes an additional pitch up moment. So they had to design a system to drive the nose down...
MCAS is supposed to be disabled with the flaps extended...will be curious to know the configuration of ET302 when they started to encounter issues.
MCAS is supposed to be disabled with the flaps extended...will be curious to know the configuration of ET302 when they started to encounter issues.
It was the FAA that said pilots should not be told about the system, not Boeing. Boeing didn’t want MCAS, the FAA did. The FAA said not to tell pilots because they would think it is an anti stall system that pushes the nose over and pilots would not properly recover from a stall. They were right, as evidenced in all the articles talking about the “stick pusher” and the new anti stall system, neither of which exist. Where they were wrong was not being able to see into the future where a damaged/malfunctioning AOA vane could cause that condition.
Thread
Thread Starter
Forum
Replies
Last Post