Go Back  Airline Pilot Central Forums > Career Builder > Technical
Critical Mach Number >

Critical Mach Number

Notices
Technical Technical aspects of flying

Critical Mach Number

Old 10-03-2013, 06:42 AM
  #1  
Gets Weekends Off
Thread Starter
 
RJcursed4life's Avatar
 
Joined APC: Aug 2008
Position: Olds 88, Left
Posts: 184
Default Critical Mach Number

Hi everybody, technical question. Any engineers or other technical people have solid knowledge of this?:

What, if anything, has an effect on Critical Mach Number?


"Critical Mach Number is the free stream Mach number which produces the first evidence of local sonic flow."

My interpretation is that for a given airfoil, the Critical Mach Number is a constant and doesn't change. Is my interpretation correct?

I would also go on to say that the Indicated Airspeed corresponding to Critical Mach decreases with altitude (since we all know that due to the decrease in temperature as altitude increases, TAS increases for a given IAS), but the mach number which produces the evidence of local sonic flow does not change. .80 mach is .80 mach

Thanks for your help!
RJcursed4life is offline  
Old 10-03-2013, 07:19 AM
  #2  
Gets Weekends Off
 
Joined APC: Jan 2013
Position: Pitot heat, what's to eat?
Posts: 392
Default

Mcrit also varies inversely with angle of attack. This is because the local peak velocity of the airflow over the wing increases with angle of attack.

Also your interpretation of IAS vs TAS leaves much out. The difference between IAS and TAS has to do with temperature, pressure altitude, installation errors, and compressibility. Temperature is but one factor.
ackattacker is offline  
Old 10-03-2013, 07:47 AM
  #3  
Gets Weekends Off
Thread Starter
 
RJcursed4life's Avatar
 
Joined APC: Aug 2008
Position: Olds 88, Left
Posts: 184
Default

Originally Posted by ackattacker View Post
Mcrit also varies inversely with angle of attack. This is because the local peak velocity of the airflow over the wing increases with angle of attack.

Also your interpretation of IAS vs TAS leaves much out. The difference between IAS and TAS has to do with temperature, pressure altitude, installation errors, and compressibility. Temperature is but one factor.
Could you elaborate on this? I'm trying to wrap my head around this...

So, as angle of attack increases, Mcrit decreases? This is because as the AOA is increased, local peak velocity of the airflow over the wing increases.

I've read from a questionable source that as altitude increases, Mcrit decreases. Was this statement made with the assumption that in order to maintain lift at a higher altitude, AOA must increase, thereby decreasing Mcrit?

Thank you very much for your help.
RJcursed4life is offline  
Old 10-03-2013, 08:21 AM
  #4  
Gets Weekends Off
 
Joined APC: Jan 2013
Position: Pitot heat, what's to eat?
Posts: 392
Default

Originally Posted by RJcursed4life View Post

I've read from a questionable source that as altitude increases, Mcrit decreases. Was this statement made with the assumption that in order to maintain lift at a higher altitude, AOA must increase, thereby decreasing Mcrit?

Thank you very much for your help.
That is 100% correct. For an aircraft at a given weight, steady state flight, increases in altitude will decrease Mcrit for exactly the reason you stated.

Keep in mind Mcrit is not a limitation like Mmo. Most jet aircraft cruise around .02 or .03 faster than Mcrit, which is just the "onset" of mach effects such as tuck and wave drag. The faster you go past Mcrit, the more those effects begin to be felt until eventually the designers impose the Mmo.
ackattacker is offline  
Old 10-03-2013, 09:08 AM
  #5  
Gets Weekends Off
Thread Starter
 
RJcursed4life's Avatar
 
Joined APC: Aug 2008
Position: Olds 88, Left
Posts: 184
Default

Originally Posted by ackattacker View Post
That is 100% correct. For an aircraft at a given weight, steady state flight, increases in altitude will decrease Mcrit for exactly the reason you stated.

Keep in mind Mcrit is not a limitation like Mmo. Most jet aircraft cruise around .02 or .03 faster than Mcrit, which is just the "onset" of mach effects such as tuck and wave drag. The faster you go past Mcrit, the more those effects begin to be felt until eventually the designers impose the Mmo.

Great. That is what I needed to know. Do you have idea of any documents or books that I could review to learn about this even more? I've got the Aerodynamics for Naval Aviators but really, it just confused me more. Or perhaps I should reread it with this knowledge and it might make more sense....
RJcursed4life is offline  
Old 10-04-2013, 12:07 PM
  #6  
Moderator
 
Cubdriver's Avatar
 
Joined APC: May 2006
Position: ATP, CFI etc.
Posts: 6,056
Default

AoA does increase the local flow velocity on top of the wing as mentioned, but recall the speed of sound decreases in thinner air as air molecules are spaced farther apart and are not as fast at transferring the kinetic energy. Speed of sound is greater in higher density flows, like sea-level atmosphere and water. In water the speed of sound is highest, so water going vessels use audible pings because they are quick in the dense medium. In thin air you need something a bit faster and we use radio waves and microwaves. M critical is the speed at which sound goes supersonic as mentioned, and occurs where the airfoil is the most cambered. Designers look at the required AoA for a given aircraft wing in cruise and make sure it is compatible with Mcrit for acceptable drag. If not, there are tricks you can do to raise Mcrit like wing sweep, flat airfoils, washout, etc.
Cubdriver is offline  
Old 10-04-2013, 05:55 PM
  #7  
On Reserve
 
Joined APC: Sep 2013
Posts: 12
Default

My 2 cents worth: Mcrit for a given airframe will not change with respect to changes in altitude/airspeed/density. What does change however, is the True Airspeed at which that Mcrit number is achieved. As altitude increases all forms of airspeed for a given mach number will decrease (ie IAS, Calibrated, Equivalent, and True). What does not change however is the Mach speed of the airflow which causes the first evidence of local sonic flow. And that can be on ANY part of the aircraft, not just the wing.
It is true that increasing AOA will increase the velocity of airflow over the wing but this does not change the Mcrit number for that airplane, it just reaches that critical number sooner than if you simply accelerated in level flight.

The shape of the airfoil affects the Critical Mach Number.

Last edited by Spoonman; 10-04-2013 at 05:59 PM. Reason: Left out info
Spoonman is offline  
Old 10-05-2013, 04:22 AM
  #8  
Line Holder
 
Joined APC: Jul 2010
Posts: 88
Default

Originally Posted by Spoonman View Post
My 2 cents worth: Mcrit for a given airframe will not change with respect to changes in altitude/airspeed/density. What does change however, is the True Airspeed at which that Mcrit number is achieved. As altitude increases all forms of airspeed for a given mach number will decrease (ie IAS, Calibrated, Equivalent, and True). What does not change however is the Mach speed of the airflow which causes the first evidence of local sonic flow. And that can be on ANY part of the aircraft, not just the wing.
It is true that increasing AOA will increase the velocity of airflow over the wing but this does not change the Mcrit number for that airplane, it just reaches that critical number sooner than if you simply accelerated in level flight.

The shape of the airfoil affects the Critical Mach Number.
Forgive me if I appear to be redundant, by shape you mean swept wing?
BladeRunner is offline  
Old 10-05-2013, 05:38 AM
  #9  
Gets Weekends Off
Thread Starter
 
RJcursed4life's Avatar
 
Joined APC: Aug 2008
Position: Olds 88, Left
Posts: 184
Default

Originally Posted by Spoonman View Post
My 2 cents worth: Mcrit for a given airframe will not change with respect to changes in altitude/airspeed/density. What does change however, is the True Airspeed at which that Mcrit number is achieved. As altitude increases all forms of airspeed for a given mach number will decrease (ie IAS, Calibrated, Equivalent, and True). What does not change however is the Mach speed of the airflow which causes the first evidence of local sonic flow. And that can be on ANY part of the aircraft, not just the wing.
It is true that increasing AOA will increase the velocity of airflow over the wing but this does not change the Mcrit number for that airplane, it just reaches that critical number sooner than if you simply accelerated in level flight.

The shape of the airfoil affects the Critical Mach Number.
See, now that's what I thought. That makes more sense to me....but what is correct? Does Mcrit change inversely with AOA on an airplane or is it a constant?
RJcursed4life is offline  
Old 10-05-2013, 08:08 AM
  #10  
On Reserve
 
Joined APC: Sep 2013
Posts: 12
Default

That's a good question. With a straight, (non swept), wing the Mcrit number can be increased by reducing the thickness of the airfoil. The velocity of airflow over the wing at any given TAS will be slower for a thinner wing than a thicker wing (assuming a positive camber wing). So a thinner wing will have a higher Mcrit than a thicker wing.

The problem is that a wing can only be made so thin before it is no longer structurally sound so the idea of sweeping the wing came about. When a wing is swept back the chord line of the wing is no longer perpendicular to the relative wind. The result is that the airflow is split into two components: 1) Spanwise Flow, which travels parallel to the leading edge of the wing, is not accelerated over the wing at all, and produces no lift.
2) Chordwise Flow, flows parallel to the chord of the wing and is the only flow which produces lift.
Since the wind is split into these two components, the more the wing is swept back the more Spanwise (bad) flow, and less Chordwise (good) flow you get.

Ex: A sweep angle of 37 degrees produces a chordwise flow that has 80 percent of the free-stream speed; at 45 degrees of sweep, it's 71 percent. Therefore the aircraft can move through the air at a higher TAS before reaching its Critcal Mach number.

Last two points: First, the more the wing is swept the less lift is produced for any given TAS, which results in poor slow speed handling. Think of all the crap on the front and back of a 727 wing. Second, fuselage components such as the canopy can now have a lower critcal mach number than the wing. Remember that Mcrit is for the entire airframe and not just the wing.

Sorry for the long, drawn out explanation, but hope it helps.
Spoonman is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Kayco
United
38
11-13-2012 02:18 PM
AirbornPegasus
Regional
19
05-29-2011 06:06 PM
rsmith6621ab
Allegiant
0
05-12-2011 04:54 PM
Quagmire
Major
253
04-16-2011 06:19 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Thread Tools
Search this Thread
Your Privacy Choices