View Single Post
Old 04-19-2017 | 03:44 PM
  #460  
TalkTurkey
Banned
 
Joined: Oct 2014
Posts: 2,001
Likes: 0
From: 6 Train - Panhandler
Default

Originally Posted by wmupilot85
One thing I noticed recently with the new 6 zone ACARS, was that we couldn't block out until AFTER we had our TDM back.

As for block in, say you land, stop, set the parking brake at 1500. You arrive at the gate at 1510, but don't set the parking brake and just hold the brakes, when the MCD is opened, it will send 1500 as the time. On the flip side, you arrive at 1510, you set the brake, wait 10 minutes to open the MCD until a gate agent arrives, it will send the 1510 time and not the 1520 time that the door actually opened, unless you release the parking brake for about 10 seconds and reset it. A lot of captains just don't understand this and they think it's the MCD that controls it.
This is good information. Thanks. 9E -200s are the opposite. To block out, you drop the brake, close the door and reset the brake. To block in you do the exact same thing. Drop, open, set.
Reply