View Single Post
Old 07-01-2017, 11:48 AM
  #12  
galaxy flyer
Gets Weekends Off
 
galaxy flyer's Avatar
 
Joined APC: May 2010
Position: Baja Vermont
Posts: 5,177
Default

perfInit,

Don't confuse TERPS (approach and departure design) with ATC enroute rates. There are minimum climb graidients for Victor airways, tho. I think it's 150'/nm below 6,000' MSL, 120'/nm between 6,000' and 10,000' and 100'/nm up to .17,999'.

AIM 4-4-10,

d. When ATC has not used the term “AT PILOT’S DISCRETION” nor imposed any climb or descent restrictions, pilots should initiate climb or descent promptly on acknowledgement of the clearance. Descend or climb at an optimum rate consistent with the operating characteristics of the aircraft to 1,000 feet above or below the assigned altitude, and then attempt to descend or climb at a rate of between 500 and 1,500 fpm until the assigned altitude is reached. If at anytime the pilot is unable to climb or descend at a rate of at least 500 feet a minute, advise ATC. If it is necessary to level off at an intermediate altitude during climb or descent, advise ATC, except when leveling off at 10,000 feet MSL on descent, or 2,500 feet above airport elevation (prior to entering a Class C or Class D surface area), when required for speed reduction.
GF
galaxy flyer is offline