Originally Posted by MD11

Or it could be as complicated as this: ATC instructs " insert your airline 500, proceed direct Greenwood (GRD), then outbound on the 130 radial to intercept the 050 inbound to Colliers (IRQ). Use the place bearing distance function "GRD130/99" and insert on the legs page, next go to the fix page and insert IRQ and the crossing radial of 050, you will distance crossing of 27 miles. Go back to the legs page and modify your GRD130/99 to GRD130/27. From that waypoint add direct to IRQ. If you look at the bearing to on the legs page, it may be off slighty from what ATC instructed, so consequently you can trim up the GRD pbd to match.