Originally Posted by
FlyinFoSheezy
Yes, i agree with pre-loading the fixes. Some FMS and GPS systems know the Victor Airways and Jet Routes, but our Garmin does not. I our case my filed flight plan was: COATE J36 FNT
Note the jet route i used --> J36
In FLTPLAN.com you press NavLog and the next page shows your plan, winds aloft, fuel estimate, time estimate, etc.
Just below that it shows all the FIXES on your planned route... even the jet route J36 in my example.
So my plan: COATE J36 FNT
has fixes shown as:
COATE
LHY
MINEO
DKK
JLGON
FNT
From here it is easy to enter these into the GPS or FMS, and quickly double-check on the IFR chart.
Fltplan.com does not show ALL of the fixes along the airway, but major waypoints/turns. Example is KALB.ALB.J6.LRP.KMDT (not actually routing you'd get on this route, but it is for the arrival to IAD).
This is what fltplan.com spits out:
ALB
SAX
BWZ
LRP
This is the full routing:
ALB
ACOVE
WEETS
FLOSI
SAX
BWZ
PARKE
KAYNE
HOUTN
LRP
To my knowledge, there is no way to get a "long printout".