StratuX--Home Built ADS-B kit
#2
Line Holder
Joined APC: Jun 2015
Position: Embraer Phenom 100/300 - Captain
Posts: 29
#3
There was an article about it in one of the recent EAA Sport Aviation mags. May be able to find it online. Basically they say it works as good as many of the other ones. Plus it will probably be able to support later updates. Such as AHRS. It's also supported with Foreflight.
#4
I built one a few months ago... for $100, it works like a champ! You may not be able to get data until you're ~500AGL and in range of an ADS-B ground antenna, but then you will be able to pick up weather and NEXRAD overlays. Traffic is dependent on someone close by being ADS-B in/out as the Stratux (and any other portable receiver, the way I read it) is "leeching" the traffic data from someone else who has a properly formatted message that tells the ground station to broadcast it out.
I use it with ForeFlight. Seamless integration.
I use it with ForeFlight. Seamless integration.
#7
I bought the components off Amazon before the "kit" was available, which meant having to order five or so items instead of one. Still, you have to spend the 10 minutes (if that) to put it together - far easier than some of the Frankenstein computer systems I've cobbled together in the past
I also bought a cigarette-lighter USB adaptor as we conveniently have an outlet in the 172 that this one is going into... don't have to worry about power, and the USB adaptor has three ports so the iPad can also get plugged in.
I also bought a cigarette-lighter USB adaptor as we conveniently have an outlet in the 172 that this one is going into... don't have to worry about power, and the USB adaptor has three ports so the iPad can also get plugged in.
#8
StratuX--Home Built ADS-B kit
No kit. Pieced it together myself. Not an engineer but comfortable around electronics. Bought the Pi locally and splurged on a Pi case. Not considering a custom case yet, but I've learned that UPS Stores are installing 3D printers for public use. I'm guessing that FedEx Kinkos will be next.
$98
- [ ] $35 E14 Raspberry 3 (MicroCenter)
- [ ] $25 NooElec Nano 2 RTL-SDR (Amazon)
- [ ] $12 Ublox7 GPS (eBay)
- [ ] $07 microSDHC 16GB (MicroCenter)
- [ ] $14 C4Labs Zebra Case (MicroCenter)
- [ ] $04 Velco squares (Michaels)
- [ ] $01 Clear 4x6 Photo Box (Michaels)
- [ ] $00 Innergie PocketCell - 3,000 mAh 2.1A ($25 Amazon)
- [ ] $00 microUSB power cable 6" (on hand)
$98
- [ ] $35 E14 Raspberry 3 (MicroCenter)
- [ ] $25 NooElec Nano 2 RTL-SDR (Amazon)
- [ ] $12 Ublox7 GPS (eBay)
- [ ] $07 microSDHC 16GB (MicroCenter)
- [ ] $14 C4Labs Zebra Case (MicroCenter)
- [ ] $04 Velco squares (Michaels)
- [ ] $01 Clear 4x6 Photo Box (Michaels)
- [ ] $00 Innergie PocketCell - 3,000 mAh 2.1A ($25 Amazon)
- [ ] $00 microUSB power cable 6" (on hand)
Thread
Thread Starter
Forum
Replies
Last Post