Originally Posted by
bozobigtop
All FedEx caravans with hubs in LAS, SAN, ONT, OAK, and SMF. Many of the pilots holding routes from those hubs live in the outstation cities. If you're reserve you may travel to any of these cities either hub or outstation. Most of the routes are Monday afternoon thru Saturday mornings. Early morning flights from the hubs to the outstations in which you're at the outstation doing the day and spend the nights in the hubs. The last pay structure I saw was about 40000 a year to start, but I believe with a route the per diem would make the yearly pay more. They had all the standard benefits better than the benefits I had at the regionals. It's an excellent company with good people.
I hope this information helps you.
Interviewed with West Air a while back. Thought I'd share my experience if anyone is going for an interview.
West Air, Inc. Air Cargo Delivery Provider Since 1988
The interview process is a 3 part process that takes about 1.5 to 2 hours: Interview, 25 question written test, and sim ride. It takes place at their Fresno office located at KFAT.
The interview is with the chief pilot and director of ops. It's very laid back and really more of a get to know you. Perhaps they tailor it to your experience. You might just end up 'talking shop' and any stories you have like emergencies, how you saved the day, "there I was a FL350..." Don't sweat the interview at all. They make you feel at home very quickly.
The 25 question written covers 91/135 regs and some AIM. There are 2 questions at the asking for the Garmin 530/430. They don't expect you to know those, but it's a bonus if you can impress them. You'll learn the Garmin ops at Flight Safety. The written is fill-in, not multiple choice. Write as much as you can. You end up 'discussing' the written afterward and any questions you might have. Basically, they didn't grade it for pass or fail. They just want to see that you have a solid foundation of regs and IFR operations since you will be single pilot IFR.
The sim ride utilizes Microsoft Flight Sim with a full yoke setup. The aircraft is the C208. They will tell you approximate power settings and airspeeds. The trim is funky. It's IMC the entire flight. The chief pilot or director will act as ATC. Depart KFAT, vectors for the VOR 11L approach. Fly to MAP, go published missed, and hold. I was asked some random IFR questions during the flight like EFC definition, lost comms procedures, etc. After 1 or 2 turns in the hold, vectors for the ILS. Reach DH, breakout and land. 20-25 minutes total.
Ask for a tour of their maintenance facility. Depending on mx status, you should be able to sit in one of the C208s. Fantastic panel configuration. Full Garmin setup- G600, Gmx200, and G530/430. Google those. Basically full glass. This is a sweet setup for single pilot IFR.
As for the QoL, pay, schedule, the above poster's info is pretty much current.
Training: At least 1 full day in Fresno filling out employment paperwork and going over company ops. Then you're sent home with a Computer Based Training (CBT) course (20 to 30 hours?) to prep you for ground school and flight sim. Roughly 10 days training at Cessna Flight Safety in Wichita. Following by at least 1 week of OE with a check airman to get you up to speed on your route(s), followed by a 135 line check. Full pay does not kick in until you pass your linecheck. You will get approximately half pay from day 1 up to the line check. The CP/DO says pay works out to be roughly 44-45k the first year with annual raises.
Your work schedule starts on a Monday afternoon usually at the outstation back to the hub. Then it's 2 legs per day- early morning from hub to outstation... "rest" during the day, then fly back in the late afternoon. This usually ends on Saturday morning. Some people choose to live at the outstation so they can spend their day (resting) at home instead of a hotel. But then you will need to get a crashpad at the hub. Either way, you're home every day.
They mentioned plans to go into pax operations using the B1900 or Brasilia. WA could be a good place for those wanting to get out of instructing and log turbine PIC IFR. Plus you're home every day so it's an ideal job for those with a family/kids. Cheers!