Rf 100 vc2
11-26-2018 | 07:42 AM
#2
Gets Weekends Off
Joined: Dec 2017
Posts: 470
Likes: 0
11-26-2018 | 11:10 AM
#3
Gets Weekends Off
Joined: Jan 2013
Posts: 294
Likes: 0
Alright. On a PC, type the command, RF 100 VC2 then press Home to return the carriage to the top left corner of the screen (or click it there, or tap if your using a tablet) . Then Esc Esc, twice to drop the carriage down to the 3rd line, then tab through the fields as you fill them out. Do not put anything in the fields that do not apply. Once you have tabbed to the Send field, press Enter.
You should get a DONE message if successful.
You should get a DONE message if successful.
11-26-2018 | 11:29 AM
#4
On Reserve
Joined: Jan 2018
Posts: 21
Likes: 0
ReEnter?
I may be making a mistake in trying to do this through mobileFOS, but I do not see “done” on my screen after entering everything, instead I receive “ReEnter” on the top of my screen. Carry over blocks and respective choices are blank.
11-26-2018 | 11:48 AM
#5
Line Holder
Joined: Dec 2016
Posts: 1,073
Likes: 2
Login
Then Home then clear for a clean slate
Rf 100 vc2
Form comes up
Home, reset reset - that will put the cursor to the top, then bring it down two lines
Now tab (the TAB button) through the form filling out as needed
Once you are on the letter S of the word SEND, hit return on your ipad keyboard. Should say DONE
One other thing, in your settings carriage return or whatever it is called should be turned on
Then Home then clear for a clean slate
Rf 100 vc2
Form comes up
Home, reset reset - that will put the cursor to the top, then bring it down two lines
Now tab (the TAB button) through the form filling out as needed
Once you are on the letter S of the word SEND, hit return on your ipad keyboard. Should say DONE
One other thing, in your settings carriage return or whatever it is called should be turned on
11-26-2018 | 12:24 PM
#6
On Reserve
Joined: Jan 2018
Posts: 21
Likes: 0
Login
Then Home then clear for a clean slate
Rf 100 vc2
Form comes up
Home, reset reset - that will put the cursor to the top, then bring it down two lines
Now tab (the TAB button) through the form filling out as needed
Once you are on the letter S of the word SEND, hit return on your ipad keyboard. Should say DONE
One other thing, in your settings carriage return or whatever it is called should be turned on
Then Home then clear for a clean slate
Rf 100 vc2
Form comes up
Home, reset reset - that will put the cursor to the top, then bring it down two lines
Now tab (the TAB button) through the form filling out as needed
Once you are on the letter S of the word SEND, hit return on your ipad keyboard. Should say DONE
One other thing, in your settings carriage return or whatever it is called should be turned on
11-26-2018 | 01:17 PM
#7
Thread Starter
Gets Weekends Off
Joined: Aug 2016
Posts: 195
Likes: 0
Login
Then Home then clear for a clean slate
Rf 100 vc2
Form comes up
Home, reset reset - that will put the cursor to the top, then bring it down two lines
Now tab (the TAB button) through the form filling out as needed
Once you are on the letter S of the word SEND, hit return on your ipad keyboard. Should say DONE
One other thing, in your settings carriage return or whatever it is called should be turned on
Then Home then clear for a clean slate
Rf 100 vc2
Form comes up
Home, reset reset - that will put the cursor to the top, then bring it down two lines
Now tab (the TAB button) through the form filling out as needed
Once you are on the letter S of the word SEND, hit return on your ipad keyboard. Should say DONE
One other thing, in your settings carriage return or whatever it is called should be turned on
Make it 2 beers, finally got it sent!
Thread
Thread Starter
Forum
Replies
Last Post
