Search

Notices
Flight Schools and Training Ratings, building hours, airmanship, CFI topics

Radio Calls

Thread Tools
 
Search this Thread
 
Old 01-28-2007 | 09:43 AM
  #11  
Ewfflyer's Avatar
Flying Farmer
 
Joined: Jul 2006
Posts: 3,160
Likes: 0
From: Turbo-props' and John Deere's
Default

Adding "Traffic" to the last part is optional, but the first one I think definately should be there.

My pet-peeve, is run-on radio calls "Annnnnnnddd XXX traffic downwind" "Anddddddd XXX traffic base" "Annnnnnnnnndddddd xxx traffic final" AH! It drives me nuts!!!!
Reply
Old 01-31-2007 | 08:25 AM
  #12  
multipilot's Avatar
Gets Weekends Off
 
Joined: Oct 2006
Posts: 780
Likes: 0
Default

I pretty much agree with everyone else. Just remember the "5 W's" of making a position report. 1. Who you're talking to 2. who you are 3. where you are 4. what you want or want to do 5. who you're talking to (if no tower or ATC is present)

One thing that has been shunned from the AIM is requesting "Any traffic please advise." This is to help cut down on any unnecessary radio chatter, which is one of my biggest pet peeves coincidently. Usually if I am hearing a lot of chatter on the frequency, I usually very quickly and briefly ask to "cut the chatter" because it is annoying and may prevent someone from making a necessary radio call.

The FCC frequencies designated for air to air comms that can be found in the AIM 4-1-11 Table 4-1-3.
Reply
Old 02-01-2007 | 05:45 PM
  #13  
rubbersidedown's Avatar
Line Holder
 
Joined: Jun 2006
Posts: 62
Likes: 0
From: Airplane Driver
Default

I usually only say traffic once in the beginning and thats it. But its all just personal preference. The important thing is, is that you make good informative radio calls in a clear voice that everyone listening can understand. I hate it when pilots coming into the same airport that I am arriving at and they will make a call and I am still wondering where they are at. On the other hand another pet peeve is when people just get on the radio to hear themself talk. That drives me nuts.
Reply
Old 02-01-2007 | 06:01 PM
  #14  
PMeyer's Avatar
Gets Weekends Off
 
Joined: Jan 2007
Posts: 120
Likes: 0
From: Student Pilot
Default

Listen to www.liveatc.net and make the call backs for all the traffic. It helps.
Reply
Old 02-11-2007 | 03:55 PM
  #15  
Pooch's Avatar
Line Holder
 
Joined: Jan 2007
Posts: 39
Likes: 0
Default

Originally Posted by Ewfflyer
Adding "Traffic" to the last part is optional, but the first one I think definately should be there.

My pet-peeve, is run-on radio calls "Annnnnnnddd XXX traffic downwind" "Anddddddd XXX traffic base" "Annnnnnnnnndddddd xxx traffic final" AH! It drives me nuts!!!!
God I hate that more than anything! Why the heck do some of you people do that? It is so annoying. Completely senseless.

"Aaaaaaaaaaaaaaaaannnnnnnnnnnnnddd..."
Reply
Old 02-12-2007 | 05:48 AM
  #16  
Gets Weekends Off
 
Joined: Jul 2006
Posts: 1,857
Likes: 0
Default

If only there was a way to know what the FAA wanted us to do...

From AIM 4-1-9(g):
6. Recommended self-announce phraseologies: It should be noted that aircraft operating to or from another nearby airport may be making self-announce broadcasts on the same UNICOM or MULTICOM frequency. To help identify one airport from another, the airport name should be spoken at the beginning and end of each self-announce transmission.

(a) Inbound

EXAMPLE-
Strawn traffic, Apache Two Two Five Zulu, (position), (altitude), (descending) or entering downwind/base/final (as appropriate) runway one seven full stop, touch-and-go, Strawn.
Reply
Old 02-12-2007 | 06:03 AM
  #17  
TonyC's Avatar
Organizational Learning 
 
Joined: Nov 2005
Posts: 4,948
Likes: 0
From: Directly behind the combiner
Default

Originally Posted by POPA

If only there was a way to know what the FAA wanted us to do...

From AIM 4-1-9(g)6.(a)


Tssk, tssk.


<sigh>


Don't you know you've spoiled the whole thread? Where is there room for facts when opinions are so valued?





Back to the original post. Toiletduck, the first use of "traffic" is exactly what you said, you are talking to "Del Rio traffic." The second use of "Del Rio" is where you plan to land, distinguishing the Del Rio Runway 13 from any other Rwy 13 that might share the same frequency. The second "traffic" therefore doesn't make sense, and as POPA has shown is not necessary or recommended.


Now, I don't know which use of "traffic" your detractors complained about, but if they were talking about the second one, they were correct. I usually try to consider the possibility that I'm wrong before I pop off on the radio and try to correct someone. That stuff is better contemplated on the ground.


Which part of the AIM did you dig through?




.
Reply
Old 02-12-2007 | 07:27 AM
  #18  
Gets Weekends Off
 
Joined: Jan 2006
Posts: 762
Likes: 0
Default

Originally Posted by Pooch
God I hate that more than anything! Why the heck do some of you people do that? It is so annoying. Completely senseless.

"Aaaaaaaaaaaaaaaaannnnnnnnnnnnnddd..."
People who start a radio call with "And" are either a bit older or trained by someone who is a bit older. It was used back when there was about a 3 second pause between the time you pressed the PTT and the time it actually transmitted, "and" happen to fill that gap nicely, so the "and" was never actually transmitted. Nowadays radios have come along way and so people who are still use to doing it the old way will say "and" out of habit, and it will be transmitted.

The other reason for "and" is because the person does not know what they are going to say yet, it acts as a vocalized pause much like "uhhhh".
Reply
Old 02-12-2007 | 07:45 AM
  #19  
rickair7777's Avatar
Prime Minister/Moderator
Veteran: Navy
 
Joined: Jan 2006
Posts: 44,931
Likes: 701
From: Engines Turn or People Swim
Default

I still tend to tack on "any traffic please advise" at least to the intial call so as to remind any student pilots that they need to announce themselves before I come blowing through their pattern with my turbojet airliner. Obviously situational judgement is required.
Reply
Old 02-12-2007 | 08:58 AM
  #20  
TonyC's Avatar
Organizational Learning 
 
Joined: Nov 2005
Posts: 4,948
Likes: 0
From: Directly behind the combiner
Default

Originally Posted by rickair7777

I still tend to tack on "any traffic please advise" at least to the intial call so as to remind any student pilots that they need to announce themselves before I come blowing through their pattern with my turbojet airliner. Obviously situational judgement is required.

That's where you run up against the AIM again.


4-1-9. Traffic Advisory Practices at Airports Without Operating Control Towers
g. Self-Announce Position and/or Intentions
1. General.
. . . Pilots stating, “Traffic in the area, please advise” is not a recognized SelfAnnounce Position and/or Intention phrase and should not be used under any condition.






.


Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rvr1200
Regional
15
12-18-2015 03:22 AM
ERJ135
Hangar Talk
1062
05-25-2015 04:20 PM
HSLD
Hangar Talk
10
01-23-2009 09:28 PM
angelicm3
Regional
6
05-29-2006 04:39 PM
Sir James
Major
3
03-02-2006 02:22 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Your Privacy Choices