Can someone point me to the FAR for this??
03-03-2016 | 08:56 AM
#1
Thread Starter
Gets Weekends Off
Joined: Jun 2008
Posts: 122
Likes: 0
Can someone point me to the FAR for this??
Can someone point me to the FAR that corresponds to this:
"Do not exit onto another runway without ATC authorization" (page 11)
FAA Publication: Runway Safety Best Practices
https://www.faa.gov/airports/runway_...s_Brochure.pdf (page 11)
"Do not exit onto another runway without ATC authorization" (page 11)
FAA Publication: Runway Safety Best Practices
https://www.faa.gov/airports/runway_...s_Brochure.pdf (page 11)
03-03-2016 | 09:45 AM
#2
Gets Weekends Off
Joined: Nov 2011
Posts: 105
Likes: 0
From: Depends on the day
Can someone point me to the FAR for this??
It's in the AIM 4-3-20ish. (Old AIM)
The following procedures must be followed after landing and reaching taxi speed.
a. Exit the runway without delay at the first available taxiway or on a taxiway as instructed by ATC. Pilots must not exit the landing runway onto another runway unless authorized by ATC. At airports with an operating control tower, pilots should not stop or reverse course on the runway without first obtaining ATC approval.
The following procedures must be followed after landing and reaching taxi speed.
a. Exit the runway without delay at the first available taxiway or on a taxiway as instructed by ATC. Pilots must not exit the landing runway onto another runway unless authorized by ATC. At airports with an operating control tower, pilots should not stop or reverse course on the runway without first obtaining ATC approval.
03-03-2016 | 11:15 AM
#3
Thread Starter
Gets Weekends Off
Joined: Jun 2008
Posts: 122
Likes: 0
It's in the AIM 4-3-20ish. (Old AIM)
The following procedures must be followed after landing and reaching taxi speed.
a. Exit the runway without delay at the first available taxiway or on a taxiway as instructed by ATC. Pilots must not exit the landing runway onto another runway unless authorized by ATC. At airports with an operating control tower, pilots should not stop or reverse course on the runway without first obtaining ATC approval.
The following procedures must be followed after landing and reaching taxi speed.
a. Exit the runway without delay at the first available taxiway or on a taxiway as instructed by ATC. Pilots must not exit the landing runway onto another runway unless authorized by ATC. At airports with an operating control tower, pilots should not stop or reverse course on the runway without first obtaining ATC approval.
Thread
Thread Starter
Forum
Replies
Last Post
