Piedmont Interview
01-01-2008 | 01:34 PM
#1
Thread Starter
Gets Weekends Off
Joined: Sep 2007
Posts: 658
Likes: 0
From: CRJ 200/700/900 CA & Instructor
Piedmont Interview
I have an interview next week, Jan 9th. What website can I got to find the best gouge for the interview and what the sim ride is going to be like? Thanks guys.
01-01-2008 | 01:36 PM
#2
Moderator
Joined: Jun 2006
Posts: 4,077
Likes: 40
This should keep you busy for the next 3 hours...
http://www.aviationinterviews.com/pi...mpany=piedmont
http://www.aviationinterviews.com/pi...mpany=piedmont
01-01-2008 | 01:51 PM
#3
A-Team
Joined: Jul 2007
Posts: 94
Likes: 0
From: 747
They have since tweaked the interview a little from the gouges.
In my sim ride, I was not asked to do a hold... it was the allentown ils, depart, vectored to east texas vor, full approach to ILS.
In the HR interview I was asked a technical question: They give you a jepp low enroute and a jepp approach plate, give you a location on the chart, and ask you everything youd do to get down to the runway.
Other than that the gouges were right on, esp fo0r the written.
hope this helps
01-01-2008 | 02:29 PM
#4
Thread Starter
Gets Weekends Off
Joined: Sep 2007
Posts: 658
Likes: 0
From: CRJ 200/700/900 CA & Instructor
01-01-2008 | 02:33 PM
#5
Thread Starter
Gets Weekends Off
Joined: Sep 2007
Posts: 658
Likes: 0
From: CRJ 200/700/900 CA & Instructor
Im not to worried about the sim ride, I have been on a pcatd at school for a while now and got the hang of it. Im just going to go in and practice the profile before I go. I just need to know what to expect on the written.
01-01-2008 | 06:25 PM
#7
Chief Jeppesen Updater
Joined: Oct 2005
Posts: 3,080
Likes: 0
From: Executive Transport Driver
Also, give some thought to how you plan to implement CRM while flying the box. Remember- the sim is a two pilot aircraft. Call for checklists, speeds, engine settings, etc.
PM me your address and I'll try to dig up some old gouge that I have. (It's about a year old now, but still probably worth a look).
~J
01-01-2008 | 06:38 PM
#8
Gets Weekends Off
Joined: Dec 2007
Posts: 336
Likes: 0
As far as the written: What is an Inverter? Expect a few questions with the Jepps, max holding speed with different alt. What is MSA? When is ILS critical area in effect? Given an approach plate and was asked is the airport open 24 hours? (Tower was part time but airport is 24 hours, tried to trick you a little) too many other questions can't seem to remember all.....
On top of the other website mentioned above, also tried this one...
http://www.mypilotcareer.com/Piedmont.htm --- Yes, this is pretty good.
Good Luck.
On top of the other website mentioned above, also tried this one...
http://www.mypilotcareer.com/Piedmont.htm --- Yes, this is pretty good.
Good Luck.
01-02-2008 | 04:14 AM
#9
A-Team
Joined: Jul 2007
Posts: 94
Likes: 0
From: 747
The sim ride is conducted in a PCATD... an elite actually, setup with a king air. The gouges have all you need to know for the written, and also study the ATP weather section. If you shoot me an email i have some additional gouge questions that arent on the site.
[email protected]
[email protected]
01-02-2008 | 08:03 AM
#10
Thread Starter
Gets Weekends Off
Joined: Sep 2007
Posts: 658
Likes: 0
From: CRJ 200/700/900 CA & Instructor
I just got my e mail saying;
"Chris - below is your space positive travel itinerary for your interview:
Jan 8 US Airways 2550 LEX to CLT Departs 4:10 pm
Jan 9 US Airways 2491 CLT TO LEX Departs 4:05 pm
Locator: EM17XY
Happy New Year! See you soon!
Bob"
So do I go to the ticket counter in Lexington to get my airline ticket or will it be mailed to me? Also, thanks again guys with all your help on the gouge.
"Chris - below is your space positive travel itinerary for your interview:
Jan 8 US Airways 2550 LEX to CLT Departs 4:10 pm
Jan 9 US Airways 2491 CLT TO LEX Departs 4:05 pm
Locator: EM17XY
Happy New Year! See you soon!
Bob"
So do I go to the ticket counter in Lexington to get my airline ticket or will it be mailed to me? Also, thanks again guys with all your help on the gouge.
Thread
Thread Starter
Forum
Replies
Last Post
