Serious question ab new CBA
#31
They were good up to the 15 mic. The mic for the QC25....junk. Had to send the mic for the QC25 back to the factory within 2 weeks of use. The 1/80000th inch jack is WEAK. If you unplug the mic from the mount, they say that will make it stop working, can't disassemble it to make it fit in the carreir. Nice. Who the he11 makes a 2 piece mic contraption that has to remain assembled or it breaks?
#32
Gets Weekends Off
Joined APC: Apr 2013
Posts: 3,465
They were good up to the 15 mic. The mic for the QC25....junk. Had to send the mic for the QC25 back to the factory within 2 weeks of use. The 1/80000th inch jack is WEAK. If you unplug the mic from the mount, they say that will make it stop working, can't disassemble it to make it fit in the carreir. Nice. Who the he11 makes a 2 piece mic contraption that has to remain assembled or it breaks?
#33
Nobody cares. I have flown with everyone from the chief of standards on down. It was put in the FOM as a way to draw business away from the guy who dared to sell his own headset that he manufactured long long ago. That guy has since died and so did the animosity associated with it. The rule lives on because reasons I guess. I used to bring my company headset in my suitcase just in case someone challenged me on it, but it has been like 5 years and nobody who should care has said a word even when I have told them exactly what it is.
#34
Line Holder
Joined APC: Feb 2018
Posts: 51
So I don't have a separate case for it. I throw it on the top of my cooler bag and it does just fine.
Where I was having problems was where the cord comes out of the Bluetooth box. It was cracking. I realized it was because I would plug in the headset and then jam the control box between the sun visor rail and the side wall, but that torqued that cord at a weird angle.
For a while I used liquid electrical tape to "fix it". Finally I took one of those 3D printed hooks that clips to the sun visor rail and super glued it to the Bluetooth control box so I could just "clip" the box to the visor rail. That solved all the problems.
What I like better about this headset (and the Halo, and the Axios) is that the speaker is actually In the head band. The only thing going to your ears are 50 cent sound tubes. Easily replaceable/repairable on the road. You can get a hand full of the ear tips for free at any hearing aid store, buy them from 3M, or just make them yourself with foamie ear plugs.
IF you insert the tips correctly (there's a video) the noise reduction is on par with ANR. If you just shove them in your ear hole with half sticking out you'll be disappointed.
The reason I like this better than Clarity Aloft is that on the clarity the wires going to the ear tips would short out on me after a while. They'll fix it for you but it takes a while.
And once in a blue moon one of the screw on tips would come off in my ear and getting the sucker out was tough! Thought I might have to go to the ER in San Juan one day to get it out! Not a problem with the yellow foam tips because they have a "stem" you can grab on to. That was enough to turn me off to the Clarity Aloft for a while.
Thats more than you asked but yes. The CQ headset is tough. I treat it like crap, just tossing it in my bag with no protection though and it just keeps on going with no issues.
Where I was having problems was where the cord comes out of the Bluetooth box. It was cracking. I realized it was because I would plug in the headset and then jam the control box between the sun visor rail and the side wall, but that torqued that cord at a weird angle.
For a while I used liquid electrical tape to "fix it". Finally I took one of those 3D printed hooks that clips to the sun visor rail and super glued it to the Bluetooth control box so I could just "clip" the box to the visor rail. That solved all the problems.
What I like better about this headset (and the Halo, and the Axios) is that the speaker is actually In the head band. The only thing going to your ears are 50 cent sound tubes. Easily replaceable/repairable on the road. You can get a hand full of the ear tips for free at any hearing aid store, buy them from 3M, or just make them yourself with foamie ear plugs.
IF you insert the tips correctly (there's a video) the noise reduction is on par with ANR. If you just shove them in your ear hole with half sticking out you'll be disappointed.
The reason I like this better than Clarity Aloft is that on the clarity the wires going to the ear tips would short out on me after a while. They'll fix it for you but it takes a while.
And once in a blue moon one of the screw on tips would come off in my ear and getting the sucker out was tough! Thought I might have to go to the ER in San Juan one day to get it out! Not a problem with the yellow foam tips because they have a "stem" you can grab on to. That was enough to turn me off to the Clarity Aloft for a while.
Thats more than you asked but yes. The CQ headset is tough. I treat it like crap, just tossing it in my bag with no protection though and it just keeps on going with no issues.
#35
and the folks making the CQ actually care about customer service and repairs after the sale - unlike the guy who builds the Halo
#36
Line Holder
Joined APC: Feb 2018
Posts: 51
#37
Looked up an audiolgist by zip code. They did the molds. They treat it like a hearing aid fitting.
https://www.centralfloridaaudiology....ng-protection/
https://www.centralfloridaaudiology....ng-protection/
#38
Gets Weekends Off
Joined APC: Aug 2015
Posts: 633
So I don't have a separate case for it. I throw it on the top of my cooler bag and it does just fine.
Where I was having problems was where the cord comes out of the Bluetooth box. It was cracking. I realized it was because I would plug in the headset and then jam the control box between the sun visor rail and the side wall, but that torqued that cord at a weird angle.
For a while I used liquid electrical tape to "fix it". Finally I took one of those 3D printed hooks that clips to the sun visor rail and super glued it to the Bluetooth control box so I could just "clip" the box to the visor rail. That solved all the problems.
What I like better about this headset (and the Halo, and the Axios) is that the speaker is actually In the head band. The only thing going to your ears are 50 cent sound tubes. Easily replaceable/repairable on the road. You can get a hand full of the ear tips for free at any hearing aid store, buy them from 3M, or just make them yourself with foamie ear plugs.
IF you insert the tips correctly (there's a video) the noise reduction is on par with ANR. If you just shove them in your ear hole with half sticking out you'll be disappointed.
The reason I like this better than Clarity Aloft is that on the clarity the wires going to the ear tips would short out on me after a while. They'll fix it for you but it takes a while.
And once in a blue moon one of the screw on tips would come off in my ear and getting the sucker out was tough! Thought I might have to go to the ER in San Juan one day to get it out! Not a problem with the yellow foam tips because they have a "stem" you can grab on to. That was enough to turn me off to the Clarity Aloft for a while.
Thats more than you asked but yes. The CQ headset is tough. I treat it like crap, just tossing it in my bag with no protection though and it just keeps on going with no issues.
Where I was having problems was where the cord comes out of the Bluetooth box. It was cracking. I realized it was because I would plug in the headset and then jam the control box between the sun visor rail and the side wall, but that torqued that cord at a weird angle.
For a while I used liquid electrical tape to "fix it". Finally I took one of those 3D printed hooks that clips to the sun visor rail and super glued it to the Bluetooth control box so I could just "clip" the box to the visor rail. That solved all the problems.
What I like better about this headset (and the Halo, and the Axios) is that the speaker is actually In the head band. The only thing going to your ears are 50 cent sound tubes. Easily replaceable/repairable on the road. You can get a hand full of the ear tips for free at any hearing aid store, buy them from 3M, or just make them yourself with foamie ear plugs.
IF you insert the tips correctly (there's a video) the noise reduction is on par with ANR. If you just shove them in your ear hole with half sticking out you'll be disappointed.
The reason I like this better than Clarity Aloft is that on the clarity the wires going to the ear tips would short out on me after a while. They'll fix it for you but it takes a while.
And once in a blue moon one of the screw on tips would come off in my ear and getting the sucker out was tough! Thought I might have to go to the ER in San Juan one day to get it out! Not a problem with the yellow foam tips because they have a "stem" you can grab on to. That was enough to turn me off to the Clarity Aloft for a while.
Thats more than you asked but yes. The CQ headset is tough. I treat it like crap, just tossing it in my bag with no protection though and it just keeps on going with no issues.
#39
Thread
Thread Starter
Forum
Replies
Last Post