Introduce yourself
09-12-2013 | 07:52 AM
#5667
New Hire
Joined: Sep 2013
Posts: 1
Likes: 0
My homebuilt helicopter
Hello buddy. I am kingsley,from Nigeria. This is a wonderful site. Not like other sites that clutter the site with ads.
I am currently building a fixed pitch helicoper. Size 450. It is entirely homebuilt.
When i first made the commitment to build this helicopter. My location and dwindling funds made it impossible to buy most of the critical components required to build a docile heli. But having made a commitment,i went on to fabricate those parts i couldn't buy. These parts includes,the rotor head,swashplate,oneway bearing,main rotor blades(wooden) and a Brushed Motor modification(to increas the Motor Kv).
All these aforementioned parts have all been fabricated and tested to certify worthiness. The Heli is almost done. It took me roughly 800 hours,including several trial and errors to get it up to the current stage now
As situation stands right now. The heli does lift up under its own power and is capable of carying the full heli weight including the li-ion battery pack. However,i don't do this for long as i have to hold and steady the tail with my left hand so the Heli does not roll or pitch. The reason is; i haven't installed the servos that control the swashplate.
I'm still looking for servos and a 4 channel Tx/Rx. The one i am currently using for testing purposes,has only 3 channels. So it would be fatal to attempt to use it to fly the heli. I will pretty well appreciate it alot if some nice friend out here offers me any. In case you wish to contact me,here's my email add.; [email protected] ... Thanks
Here is my progress work on the Heli: Homebuilt Radio controlled Helicopter - Science/Technology - Nairaland
I am currently building a fixed pitch helicoper. Size 450. It is entirely homebuilt.
When i first made the commitment to build this helicopter. My location and dwindling funds made it impossible to buy most of the critical components required to build a docile heli. But having made a commitment,i went on to fabricate those parts i couldn't buy. These parts includes,the rotor head,swashplate,oneway bearing,main rotor blades(wooden) and a Brushed Motor modification(to increas the Motor Kv).
All these aforementioned parts have all been fabricated and tested to certify worthiness. The Heli is almost done. It took me roughly 800 hours,including several trial and errors to get it up to the current stage now
As situation stands right now. The heli does lift up under its own power and is capable of carying the full heli weight including the li-ion battery pack. However,i don't do this for long as i have to hold and steady the tail with my left hand so the Heli does not roll or pitch. The reason is; i haven't installed the servos that control the swashplate.
I'm still looking for servos and a 4 channel Tx/Rx. The one i am currently using for testing purposes,has only 3 channels. So it would be fatal to attempt to use it to fly the heli. I will pretty well appreciate it alot if some nice friend out here offers me any. In case you wish to contact me,here's my email add.; [email protected] ... Thanks
Here is my progress work on the Heli: Homebuilt Radio controlled Helicopter - Science/Technology - Nairaland
Thread
Thread Starter
Forum
Replies
Last Post
