De-ice Type 1 fluid mixing
#2
Our GOM says the following...
"SAE Type I fluid/water mixture is selected so that the freezing point of the mixture is at least 10 C (18 F) below OAT."
Nowhere does it give any data on a mixture of less than 50/50. I would assume this means you need at least 50% Deicing fluid.
"SAE Type I fluid/water mixture is selected so that the freezing point of the mixture is at least 10 C (18 F) below OAT."
Nowhere does it give any data on a mixture of less than 50/50. I would assume this means you need at least 50% Deicing fluid.
#4
Gets Weekends Off
Joined: Apr 2009
Posts: 693
Likes: 0
From: A-320 FO
Our GOM says the following...
"SAE Type I fluid/water mixture is selected so that the freezing point of the mixture is at least 10 C (18 F) below OAT."
Nowhere does it give any data on a mixture of less than 50/50. I would assume this means you need at least 50% Deicing fluid.
"SAE Type I fluid/water mixture is selected so that the freezing point of the mixture is at least 10 C (18 F) below OAT."
Nowhere does it give any data on a mixture of less than 50/50. I would assume this means you need at least 50% Deicing fluid.
Thread
Thread Starter
Forum
Replies
Last Post



